CRT MICRON U/V, Руководство пользователя

Страница: 27 / 37

21
This function can improve the level of blocking irrelative signals.
1. Enter CHAN MENU, choose No.4 function
2. Press [PUSH] button, the menu value in LCD turns to green color.
3. Turn channel knob to choose wanted setting.
SQ:You can hear the calling when receive a mathcing carrrier.
CDT:You can hear the calling when receive a matchng carrier and CTCSS or DCS
signaling
4. Press [PUSH] button or [P3] key to store setting and exit.
Select suitable bandwidth in accordance with different local conditions
1. Enter CHAN MENU list, choose No.5 function
2.
Press [PUSH] button, the menu value in LCD turns to green color.
3. Turn channel knob to choose wanted setting.
WID: band width is 25k(Wide band)
MID: band width is 20k(Middle band)
NAR: band width is 12.5k(Narrow band)
4. Press [PUSH] button or [P3] key to store setting and exit.
With this function on, the transceiver will be able to communicate with a transceiver in
same network without through a repeater..
1. Enter CHAN MENU list, choose No.6 function
2. Press [PUSH] button, the menu value in LCD turns to green color.
3. Turn channel knob to choose wanted setting.
ON: Turn on reverse function
OFF: Turn off reverse function
4. Press [PUSH] button or [P3] key to store setting and exit
8.4 Signaling Combination Setup
8.5 Band-width Selection
8.6 Frequency Reverse
»
This settting is valid only when CTCSS/DCS signaling added.
»
Frequency reverse is turn on, the TX and RX frequency will be exchanged, the
CTCSS or DCS signaling also will be exchanged if existed in current channel.
3. Turn channel knob to choose wanted setting
HI: Choose high power level.
MI: Choose middle power level.
LO: Choose low power level.
4. Press [PUSH] button or [P3] key to store setting and exit