7.
8.
5.
6.
Mark centre of bottom hole.
Using a spirit level adjust the cabinet so it is level.
When level accurately mark a hole in the centre of
the bottom fixing hole using the bottom bracket as
a guide.
Drill an appropriate hole for the fixing
to be used in the centre mark . Then
insert the wall plug or the toggle
bolt assembly. If using the wall plug,
ensure it is inserted flush to the wall
surface. If fitting to a tiled surface, the
wall plug should be inserted below the
surface of the tile to avoid cracking the
tiles.
Screw the bottom bracket and spacer in position
as shown, (image 1). Do not overtighten! If the
cabinet is not level, loosen the screw and adjust
until it is level. The slot will allow for adjustment.
Then screw the locking cap to the bottom bracket
and fit the cover, (see image 2).
Page 4
CAB 140 R07
Image 1
Image 2
5
/
16
” or
7
/
16
”
(8mm or
11mm)
1
2 3
6
4
7
5
8
