For details of the other items in the Croydex range please visit our website: www.croydex.com
Croydex, Central Way, Andover, Hampshire,
SP10 5AW, UK
Tel: +44 (0) 1264 365881 Fax: +44 (0) 1264 356437
MIR 031 R04
x 2
5 mm
8. Landscape Mounting
8. Mounting in Landscape Orientation
The mirrors that can be mounted in landscape orientation are;
MM720200E - Chilcombe Illuminated Mirror
MM720700E - Rookley Illuminated Mirror
MM720400E - Chawston Illuminated Mirror
MM720300E - Henbury Illuminated Mirror
To do this, measure the distance between the keyhole slot centres
and use a spirit level to mark two points on the wall. Drill the
mounting holes in the marked positions using a 6mm drill bit and
insert the screws, ensuring that the screw head extends out of the
wall by approximately 5mm. Adjust screw depth for a secure fit.
Follow
Step 6
for connecting to the electrical supply, then simply
hook the mirror onto the two screws.
Operating Instructions
To turn the LED lights on or off, operate the touch switch on the front of the mirror glass.
Product Care
To retain the best quality finish, clean product regularly with a soft cloth and mild detergents. Do not
use abrasive or chemical cleaners, as these will damage the product.
Do not position glass components in close contact with a heat source.
This product complies with the requirements of
•
European Parliament/Council Directive 2014/35/EU on the harmonisation of the laws of the
Member States relating to the making available on the market of electrical equipment designed for
use within certain voltage limits (LVD) Directive (recast).
•
European Parliament/Council Directive 2014/30/EU on the harmonisation of the laws of the
Member States relating to electromagnetic compatibility (EMC) Directive (recast).
•
European Parliament/Council Directive 2011/65/EU on the restriction of the use of certain
hazardous substances in electrical and electronic equipment (RoHS) Directive (recast).
Applicable Standards with amendments:
•
BS EN 55015:2013
•
BS EN 61547:2009
•
BS EN 60335-1:2012+A11:2014
•
BS EN 60335-2-30:2009+A11:2012
•
BS EN 62493:2015
•
BS EN 62471:2008
9.
Peel off the protective cover strip from the back of the hook
and loop fasteners and place on the back of the mirror frame.
(The adhesive tape is ideal for use on tiled and laminate
surfaces but may cause damage to painted and papered
walls.)
10.
Carefully lower the mirror to a vertical position and press
the adhesive pads against the wall to secure the bottom of the mirror.
The mirror can be removed by separating the hook and loop
fastener between the mirror and wall.
9
10
9
If mounting vertically apply round buffers to top of mirror.
