background image

MIR 031 R04

2

Bottom edge of Hang ‘N’ Lock bracket

Bracket distance.

Top edge of mirror glass

 

3.

 Place the bottom edge of the Hang ’N’ Lock bracket onto the lower reference line and mark a screw hole 

position in each cam hole recess. Remove the bracket from the wall.

4.

 Drill holes to a depth of 45mm and insert the wall plugs level with the surface of the wall. (Note: if you are fitting 

the product to a tiled surface, insert the wall plugs below the surface of the tile to avoid cracking the tiles). Insert 

the countersink screws through the Hang ‘N’ Lock cams and loosely secure the Hang ‘N’ Lock bracket to the wall.

The wall plugs supplied are for use on solid walls only.  For cavity walls or plasterboard use specialist 

fixings that are available from all good DIY stores.

5.

 

With the Hang ’N’ Lock bracket loosely attached to the wall, adjust for height and level by rotating the cams with 

a flat head screwdriver, then use a Philips screwdriver to fully tighten the mounting screws, to securely fix the 

bracket into position.

Bracket Distance

2

6. Connecting the Electrical Supply
Ensure that the domestic electrical mains supply to which the cabinet is to be connected 

is turned off.

Connect the flexible mains supply cable on the mirror to the domestic electrical mains supply ensuring that:

• 

The Live (Brown) conductor is connected to the Live on the domestic electrical mains supply.

• The Neutral (Blue) conductor is connected to the Neutral on the domestic electrical mains supply.

• The Earth (Green/Yellow) conductor is connected to the Earth/Ground on the domestic electrical mains supply.

Note: Connection of the product to the domestic electrical mains supply must only be carried out by a Building 

Regulations Part P certified electrician or must be checked by your Local Authority Building Control Department. 

7

7. 

Once Step 6 has been completed safely. Hang the mirror onto the 

Hang ‘N’ Lock bracket. Ensure the mirror has securely located onto the 

bracket before letting go.

Proceed to 

Step 9 and 10

.

Image for reference only.

3

4

5

Image for reference only.

Image for reference only.

Image for reference only.

Содержание MM720400E








Отзывы: