For details of the other items in the Croydex range please visit our website: www.croydex.com
Croydex, Central Way, Andover, Hampshire,
SP10 5AW, UK
Tel: +44 (0) 1264 365881 Fax: +44 (0) 1264 356437
MIR 035 R02
10. Connecting the Electrical Supply
Ensure that the domestic electrical mains supply to which the cabinet is to be connected
is turned off.
Connect the flexible mains supply cable on the mirror to the domestic electrical mains supply ensuring that:
•
The Live (Brown) conductor is connected to the Live on the domestic electrical mains supply.
• The Neutral (Blue) conductor is connected to the Neutral on the domestic electrical mains supply.
• The Earth (Green/Yellow) conductor is connected to the Earth/Ground on the domestic electrical mains supply.
Note: Connection of the product to the domestic electrical mains supply must only be carried out by a Building
Regulations Part P certified electrician or must be checked by your Local Authority Building Control Department.
Hang the mirror and secure the L bracket to the mirror using the bolt provided.
Operating Instructions
To turn the LED lights on or off, operate the touch switch on the front of the mirror glass.
Product Care
To retain the best quality finish, clean product regularly with a soft cloth and mild detergents. Do not
use abrasive or chemical cleaners, as these will damage the product.
Do not position glass components in close contact with a heat source.
This product complies with the requirements of
•
European Parliament/Council Directive 2014/35/EU on the harmonisation of the laws of the
Member States relating to the making available on the market of electrical equipment designed for
use within certain voltage limits (LVD) Directive (recast).
•
European Parliament/Council Directive 2014/30/EU on the harmonisation of the laws of the
Member States relating to electromagnetic compatibility (EMC) Directive (recast).
•
European Parliament/Council Directive 2011/65/EU on the restriction of the use of certain
hazardous substances in electrical and electronic equipment (RoHS) Directive (recast).
Applicable Standards with amendments:
•
BS EN 55015:2013
•
BS EN 61547:2009
•
BS EN 60335-1:2012+A11:2014
•
BS EN 60335-2-30:2009+A11:2012
•
BS EN 62493:2015
•
BS EN 62471:2008
8
9
10
8.
Place the L bracket over the threaded
hole located at the bottom of the mirror.
Using a pencil mark the position of the L
bracket onto the wall.
9.
Remove the mirror and place the bracket
on the mark and drill a hole in the centre of
the slot on the wall. Lightly screw the
bracket to the wall, allowing the bracket to
be moved up and down the slot. Remove
the mirror to connect the electrical supply.
