4
For details of the other items in the Croydex range please visit our website:
www.croydex.com
Croydex Limited, Central Way, Andover, Hampshire, SP10 5AW, UK
Tel: +44 (0) 1264 365881 Fax: +44 (0) 1264 356437
E-mail: [email protected]
IMPORTANT SAFETY NOTE:
Before proceeding ensure each pivot pin (C) is fitted with a small rubber o-ring at the base of
the threaded area. If the o-rings are not fitted please follow the diagram below for correct
fitment.
9.
Screw a pivot pin (C) through each plastic collar on the top and base of the wall bracket into
each circular boss on the cabinet assembly and tighten using a large flat head screwdriver to
fully secure the cabinet. Fig 6.
10. This cabinet has been supplied with four self adhesive rubber buffers (G) which can be used to
cushion the cabinet from any potential contact made with the wall when it is rotated on the wall
bracket. If you wish to use the rubber buffers it is suggested that a rubber buffer is placed on
the front outer edge of each of the two inner most shelves. Fig 7. If desired, the two remaining
rubber buffers can be stuck to the wall anywhere along the line where the edge of the cabinet
makes contact with the wall when it is in its fully opened position. Fig 8.
CAB 070 R05
Fig 7
Fig 8
STICK RUBBER
BUFFERS ON THE
THE WALL HERE
STICK RUBBER
BUFFERS ON
OUTER EDGE
OF SHELF FRONT
SLIDE O-RING TO THE BOTTOM
OF THE THREAD UNTIL IT IS
FULLY SEATED
O-RING FITMENT
