3
Assembly Instructions
1. Carefully remove the cabinet and wall bracket from the outer packaging.
2. Place the wall bracket (B) against the wall in the desired location of the cabinet ensuring that
there is a clear space either side of the wall bracket of 200mm if you are fitting the tall cabinet
(WC880222) or 350mm if you are fitting the large cabinet (WC880122). See Fig 1. This is the
area required by the cabinet as it rotates on the wall bracket. Please ensure that there are no
obstructions within these areas as these will restrict the opening range of the cabinet.
3.
Ensure the wall bracket is vertical using a spirit level and mark through the three holes onto
the wall with a pencil. Fig 2.
4. Using a 8mm masonry drill bit, drill the holes in the marked positions to a depth of 50mm. If
drilling through tiles, pre-drill using a ceramic drill bit.
5. Insert the wall plugs (F) flush to the surface of the wall, if fitting to a tiled surface the wall plugs
should be inserted below the surface of the tile to avoid cracking.
6.
Screw the wall bracket securely to the wall using the three wall screws (E). Fig 3.
7. Carefully position the cabinet assembly (A) into the wall bracket so that the two protruding
circular bosses on the top and base of the cabinet line up with the two large holes on the top
and base of the wall bracket. Fig 4.
8. Once the holes are aligned, place a plastic collar (D) into each hole and push through until they
are fully located into each circular boss, captivating the cabinet assembly. Fig 5.
N.B. The cabinet can be mounted as a left or a right hand side opening as desired by simply
rotating the orientation of the cabinet assembly before it is located into the wall bracket.
CAB 070 R05
Fig 3
Fig 1
Fig 2
Fig 4
Fig 5
Fig 6
350mm
LARGE
350mm
LARGE
200mm
TALL
200mm
TALL
