background image

DriveCore Install Network Series 

Power Amplifiers

page 63

Operation Manual

Warranty 

SUMMARY OF WARRANTY 

Crown International, 1718 West Mishawaka Road, Elkhart, Indiana 46517-4095 U.S.A. warrants to you, the ORIGINAL 

PURCHASER and ANY SUBSEQUENT OWNER of each NEW Crown product, for a period of three (3) years from the date of 

purchase by the original purchaser (the “warranty period”) that the new Crown product is free of defects in materials and 

workmanship. We further warrant the new Crown product regardless of the reason for failure, except as excluded in this 

Warranty.

*Warranty is only valid within the United States of America. For information on Warranty outside of the U.S.A, please contact 

your local distributor.

ITEMS EXCLUDED FROM THIS CROWN WARRANTY 

This Crown Warranty is in effect only for failure of a new Crown product which occurred within the Warranty Period. It does 

not cover any product which has been damaged because of any intentional misuse, accident, negligence, or loss which is 

covered under any of your insurance contracts. This Crown Warranty also does not extend to the new Crown product if the 

serial number has been defaced, altered, or removed.

WHAT THE WARRANTOR WILL DO 

We will remedy any defect, regardless of the reason for failure (except as excluded), by repair, replacement, or refund. We 

may not elect refund unless you agree, or unless we are unable to provide replacement, and repair is not practical or cannot 

be timely made. If a refund is elected, then you must make the defective or malfunctioning product available to us free 

and clear of all liens or other encumbrances. The refund will be equal to the actual purchase price, not including interest, 

insurance, closing costs, and other finance charges less a reasonable depreciation on the product from the date of original 

purchase. Warranty work can only be performed at our authorized service centers or at the factory. Warranty work for some 

products can only be performed at our factory. We will remedy the defect and ship the product from the service center or 

our factory within a reasonable time after receipt of the defective product at our authorized service center or our factory. All 

expenses in remedying the defect, including surface shipping costs in the United States, will be borne by us. (You must bear 

the expense of shipping the product between any foreign country and the port of entry in the United States including the 

return shipment, and all taxes, duties, and other customs fees for such foreign shipments.)

HOW TO OBTAIN WARRANTY SERVICE 

You must notify us of your need for warranty service within the warranty period. All components must be shipped in a factory 

pack, which, if needed, may be obtained from us free of charge. Corrective action will be taken within a reasonable time of 

the date of receipt of the defective product by us or our authorized service center. If the repairs made by us or our authorized 

service center are not satisfactory, notify us or our authorized service center immediately.

DISCLAIMER OF CONSEQUENTIAL AND INCIDENTAL DAMAGES 

YOU ARE NOT ENTITLED TO RECOVER FROM US ANY INCIDENTAL DAMAGES RESULTING FROM ANY DEFECT IN 

THE NEW CROWN PRODUCT. THIS INCLUDES ANY DAMAGE TO ANOTHER PRODUCT OR PRODUCTS RESULTING 

FROM SUCH A DEFECT. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATIONS OF INCIDENTAL OR 

CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.

WARRANTY ALTERATIONS 

No person has the authority to enlarge, amend, or modify this Crown Warranty. This Crown Warranty is not extended by the 

length of time which you are deprived of the use of the new Crown product. Repairs and replacement parts provided under 

the terms of this Crown Warranty shall carry only the unexpired portion of this Crown Warranty.

DESIGN CHANGES 

We reserve the right to change the design of any product from time to time without notice and with no obligation to make 

corresponding changes in products previously manufactured.

LEGAL REMEDIES OF PURCHASER 

THIS CROWN WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY 

FROM STATE TO STATE. No action to enforce this Crown Warranty shall be commenced after expiration of the warranty 

period.

THIS STATEMENT OF WARRANTY SUPERSEDES ANY OTHERS CONTAINED IN THIS MANUAL FOR CROWN PRODUCTS.  

03/13

Содержание DCi 2 300N



































































Отзывы: