background image

Obtaining Other Language Versions:

 To obtain information in another language about the use of this product, please contact your local Crown Distributor. If you need 

assistance locating your local distributor, please contact Crown at 574-294-8000.

This manual does not include all of the details of design, production, or variations of the equipment. Nor does it cover every possible situation which may arise during 

installation, operation or maintenance.

The information provided in this manual was deemed accurate as of the publication date. However, updates to this information may have occurred. To obtain the latest 

version of this manual, please visit the Crown website at www.crownaudio.com.

Trademark Notice:

 Com-Tech, BCA, Crown, Crown Audio, Amcron and Multi-Mode are registered trademarks of Crown International. DriveCore, DriveCore  Install, 

IQwic, PIP and PIP2 are trademarks of Crown International. Other trademarks are the property of their respective owners.

Some models may be exported under the name Amcron

®

© 2013 by Harman International

®

, Inc. 1718 W. Mishawaka Rd., Elkhart, Indiana 46517-9439 U.S.A. Telephone: 574-294-8000

DCi 2|300N

DCi 4|300N

DCi 8|300N

DCi 2|600N

DCi 4|600N

DCi 8|600N

DCi Series – Network Input Models 

Operation Manual

5032774 - 08/13

Содержание DCi 2 300N



































































Отзывы: