Crown CT18114 Скачать руководство пользователя страница 27

Страница: 27 / 196

English

Noise information

Always wear ear protection if the sound

pressure exceed 85 dB(A).

Declaration of conformity

We declare under our sole responsibility that the

product described under "Power tool specifica

tions" is in conformity with all relevant provisions of

the directives 2006/42/EC including their amend-

ments and complies with the following standards:

EN 60745-1,

EN 60745-2-6�

Certification

Wu Cunzhen

manager

Merit Link International AG

Stabio, Switzerland, 30�07�2020

WARNING - To reduce the risk of injury,

user must read instruction manual!

General safety rules

WARNING! Read all safety warnings and

all instructions.

Failure to follow the warn-

ings and instructions may result in electric

shock, fire and / or serious injury.

Save all warnings and instructions for future refer-

ence.

The term "power tool" in the warnings refers to your

mains-operated (corded) power tool or battery-operat-

ed (cordless) power tool�

Work area safety

•

Keep work area clean and well lit.

Cluttered or

dark areas invite accidents�

•

Do not operate power tools in explosive atmos-

pheres, such as in the presence of flammable liq-

uids, gases or dust.

Power tools create sparks which

may ignite the dust or fumes�

•

Keep children and bystanders away while oper-

ating a power tool.

Distractions can cause you to lose

control�

Electrical safety

•

Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any adapter

plugs with earthed (grounded) power tools.

Un-

modified plugs and matching outlets will reduce risk

of electric shock�

•

Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators.

There is an increased risk of electric

shock if your body is earthed or grounded�

•

Do not expose power tools to rain or wet condi-

tions.

Water entering a power tool will increase the risk

of electric shock�

•

Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges or

moving parts.

Damaged or entangled cords increase

the risk of electric shock�

•

When operating a power tool outdoors, use an

extension cord suitable for outdoor use.

Use of a

cord suitable for outdoor use reduces the risk of elec-

tric shock�

•

If operating a power tool in a damp location is una-

voidable, use a residual current device (RCD) pro-

tected supply.

Use of an RCD reduces the risk of electric

shock� NOTE! The term "residual current device (RCD)"

may be replaced by the term "ground fault circuit inter-

rupter (GFCI)" or "earth leakage circuit breaker (ELCB)"�

•

Warning!

Never touch the exposed metal surfaces

on gearbox, shield, and so on because touching metal

surfaces will be interfered with the electromagnetic

wave, thus causing potential injury or accidents�

Personal safety

•

Stay alert, watch what you are doing and use

common sense when operating a power tool. Do

not use a power tool while you are tired or under

the influence of drugs, alcohol or medication.

moment of inattention while operating power tools may

result in serious personal injury�

•

Use personal protective equipment. Always

wear eye protection.

Protective equipment such as

dust mask, non-skid safety shoes, hard hat, or hearing

protection used for appropriate conditions will reduce

personal injuries�

•

Prevent unintentional starting. Ensure the

switch is in the off-position before connecting to

power source and / or battery pack, picking up or

carrying the tool

. Carrying power tools with your fin

ger on the switch or energising power tools that have

the switch on invites accidents�

•

Remove any adjusting key or wrench before

turning the power tool on.

A wrench or a key left at-

tached to a rotating part of the power tool may result

in personal injury�

•

Do not overreach. Keep proper footing and bal-

ance at all times.

This enables better control of the

power tool in unexpected situations�

•

Dress properly. Do not wear loose clothing or

jewellery. Keep your hair, clothing and gloves

away from moving parts.

Loose clothes, jewellery or

long hair can be caught in moving parts�

•

If devices are provided for the connection of

dust extraction and collection facilities, ensure

these are connected and properly used.

Use of dust

collection can reduce dust-related hazards�

•

Do not let familiarity gained from frequent use of

tools allow you to become complacent and ignore

tool safety principles

� A careless action can cause

severe injury within a fraction of a second�

•

Warning!

Power tools can produces an electromag-

netic field during operation. This field may under some

circumstances interfere with active or passive medical

implants� To reduce the risk of serious or fatal injury,

we recommend persons with medical implants to con-

sult their physician and the medical implant manufac-

turer before operating this power tool�

Power tool use and care

•

The persons with lowered psychophysical or men-

tal aptitudes as well as children can not operate the

power tool, if they are not supervised or instructed

Содержание CT18114





































































































































































































Результаты поиска

Содержание CT18114

Отзывы:

Похожие инструкции для CT18114

Бренды по названию

Популярные бренды

Crown CT18114, Оригинальное руководство пользователя

Результаты поиска

Содержание CT18114

Отзывы:

Похожие инструкции для CT18114

Бренды по названию

Популярные бренды