Crown CT18108 Скачать руководство пользователя страница 21

21

English

Work area safety

 

Keep  work  area  clean  and  well  lit.

 Cluttered or 

dark areas invite accidents�

 

Do not operate power tools in explosive atmos-

pheres, such as in the presence of flammable liq-

uids, gases or dust.

 Power tools create sparks which 

may ignite the dust or fumes�

 

Keep children and bystanders away while oper-

ating a power tool.

 Distractions can cause you to lose 

control�

Electrical safety

 

Power tool plugs must match the outlet. Never 

modify the plug in any way. Do not use any adapter 

plugs  with  earthed  (grounded)  power  tools.

 Un-

modified  plugs  and  matching  outlets  will  reduce  risk 

of electric shock�

 

Avoid  body  contact  with  earthed  or  grounded 

surfaces,  such  as  pipes,  radiators,  ranges  and 

refrigerators.

 There is an increased risk of electric 

shock if your body is earthed or grounded�

 

Do not expose power tools to rain or wet condi-

tions.

 Water entering a power tool will increase the risk 

of electric shock�

 

Do not abuse the cord. Never use the cord for 

carrying,  pulling  or  unplugging  the  power  tool. 

Keep  cord  away  from  heat,  oil,  sharp  edges  or 

moving parts.

 Damaged or entangled cords increase 

the risk of electric shock�

 

When operating a power tool outdoors, use an 

extension cord suitable for outdoor use.

 Use of a 

cord suitable for outdoor use reduces the risk of elec-
tric shock�

 

If operating a power tool in a damp location is 

unavoidable, use a residual current device (RCD) 

protected  supply.

 Use of an RCD reduces the risk 

of electric shock� NOTE! The term "residual current 
device (RCD)" may be replaced by the term "ground 
fault circuit interrupter (GFCI)" or "earth leakage circuit 
breaker (ELCB)"�

 

Warning!

 Never touch the exposed metal surfaces 

on gearbox, shield, and so on because touching metal 
surfaces will be interfered with the electromagnetic 
wave, thus causing potential injury or accidents�

Personal safety

 

Stay  alert,  watch  what  you  are  doing  and  use 

common sense when operating a power tool. Do 

not use a power tool while you are tired or under 

the  influence  of  drugs,  alcohol  or  medication.

 A 

moment of inattention while operating power tools may 
result in serious personal injury�

 

Use  personal  protective  equipment.  Always 

wear  eye  protection.

 Protective equipment such as 

dust mask, non-skid safety shoes, hard hat, or hearing 
protection used for appropriate conditions will reduce 
personal injuries�

 

Prevent  unintentional  starting.  Ensure  the 

switch is in the off-position before connecting to 

power source and / or battery pack, picking up or 

carrying the tool

. Carrying power tools with your fin

-

ger on the switch or energising power tools that have 
the switch on invites accidents�

 

Remove  any  adjusting  key  or  wrench  before 

turning the power tool on.

 A wrench or a key left at-

tached to a rotating part of the power tool may result 
in personal injury�

 

Do not overreach. Keep proper footing and bal-

ance at all times.

 This enables better control of the 

power tool in unexpected situations�

 

Dress  properly.  Do  not  wear  loose  clothing  or 

jewellery.  Keep  your  hair,  clothing  and  gloves 

away from moving parts.

 Loose clothes, jewellery or 

long hair can be caught in moving parts�

 

If  devices  are  provided  for  the  connection  of 

dust  extraction  and  collection  facilities,  ensure 

these are connected and properly used.

 Use of dust 

collection can reduce dust-related hazards�

 

Do not let familiarity gained from frequent use of 

tools allow you to become complacent and ignore 

tool  safety  principles

� A careless action can cause 

severe injury within a fraction of a second�

 

Warning!

 Power tools can produces an electromag-

netic field during operation. This field may under some 

circumstances interfere with active or passive medical 
implants� To reduce the risk of serious or fatal injury, 
we recommend persons with medical implants to con-
sult their physician and the medical implant manufac-
turer before operating this power tool�

Power tool use and care

 

The persons with lowered psychophysical or men-

tal aptitudes as well as children can not operate the 
power tool, if they are not supervised or instructed 
about use of the power tool by a person responsible 
for their safety�

 

Do  not  force  the  power  tool.  Use  the  correct 

power tool for your application

� The correct power 

tool will do the job better and safer at the rate for which 
it was designed�

 

Do  not  use  the  power  tool  if  the  switch  does 

not turn it on and off.

 Any power tool that cannot be 

controlled with the switch is dangerous and must be 
repaired�

 

Disconnect the plug from the power source and / 

or the battery pack from the power tool before mak-

ing  any  adjustments,  changing  accessories,  or 

storing power tools

� Such preventive safety measures 

reduce the risk of starting the power tool accidentally�

 

Store idle power tools out of the reach of chil-

dren and do not allow persons unfamiliar with the 

power  tool  or  these  instructions  to  operate  the 

power tool.

 Power tools are dangerous in the hands 

of untrained users�

 

Maintain power tools. Check for misalignment or 

binding of moving parts, breakage of parts and any 

other condition that may affect the power tool’s op-

eration. If damaged, have the power tool repaired 

before  use.

 Many accidents are caused by poorly 

maintained power tools�

 

Keep  cutting  tools  sharp  and  clean.

 Properly 

maintained cutting tools with sharp cutting edges are 
less likely to bind and are easier to control�

 

Use  the  power  tool,  accessories  and  tool  bits 

etc. in accordance with these instructions, taking 

into account the working conditions and the work 

to be performed. 

Use of the power tool for operations 

different from those intended could result in a hazard-
ous situation�

 

Keep handles and grasping surfaces dry, clean 

and free from oil and grease.

 Slippery handles and 

grasping surfaces do not allow for safe handling and 
control of the tool in unexpected situations�

 

Note that when you operate a power tool, please 

hold the auxiliary handle correctly, which is helpful 
when controlling the power tool� Therefore, proper 
holding can reduce the risk of accidents or injuries�

Содержание CT18108

































































































































































Отзывы: