background image

NOR

TH AMERICA

SUMMAR

Y OF 

W

ARRANTY

The Cr

own Audio Division of Cr

own Inter

national, Inc., 1718 W

est Mishawaka Road,

Elkhar

t, Indiana 46517-4095 U.S.A. war

rants to you, the ORIGINAL PURCHASER and

ANY SUBSEQUENT OWNER of each NEW Cr

own pr

oduct, for a period of thr

ee (3) years

from the date of pur

chase by the original purchaser (the “war

ranty period”) that the new

C

rown pr

oduct is fr

ee of defects in materials and workmanship. W

e

 fur
ther war

rant the

new Cr

own pr

oduct r

egar

dless of the r

eason for failur

e, except as excluded in this

W

a

rranty

.

ITEMS EXCLUDED FR

OM 

THIS CR

O

WN 

W

ARRANTY

This Crown W

a

rranty is in ef

fect only for failur

e of a new Cr

own pr

oduct which occurr

e

d

within the W

a

rranty Period. It does not cover any pr

oduct which has been damaged

because of any intentional misuse, accident, negligence, or loss which is cover

ed under

any of your insurance contracts. This Cr

own W

a

rranty also does not extend to the new

C

rown pr

oduct if the serial number has been defaced, alter

ed, or r

emoved.

WHA

T

 THE W

ARRANT

OR 

WILL 

DO

We will r

emedy any defect, r

egar

dless of the r

eason for failur

e (except as excluded), by

repair

, r

eplacement, or r

efund. W

e

 may not elect r

efund unless you agr

ee, or unless we

ar

e unable to pr

ovide r

eplacement, and r

epair is not practical or cannot be timely made.

If a r

efund is elected, then you must make the defective or malfunctioning pr

oduct

available to us fr

ee and clear of all liens or other encumbrances. The r

efund will be equal

to the actual pur

chase price, not including inter

est, insurance, closing costs, and other

finance char

ges less a r

easonable depr

eciation on the pr

oduct fr

om the date of original

pur

chase. W

a

rranty work can only be per

for
med at our authorized service centers or

at the factor

y.

 W
e

 will r

emedy the defect and ship the pr

oduct fr

om the ser

vice center

or our factor

y within a r

easonable time after r

eceipt of the defective pr

oduct at our

authorized ser

vice center or our factor

y.

 All expenses in r

emedying the defect, including

sur

face shipping costs in the United States, will be bor

ne by us. (Y

ou must bear the

expense of shipping the pr

oduct between any for

eign countr

y and the por

t of entr

y in

the United States and all taxes, duties, and other customs fees for such for

eign

shipments.)

HO

W
 T

O

 OBT

AIN 

W

ARRANTY 

SER

VICE

Y

ou must notify us of your need for war

ranty ser

vice not later than ninety (90) days after

expiration of the war

ranty period. All components must be shipped in a factor

y pack,

which, if needed, may be obtained fr

om us fr

ee of charge. Cor

rective action will be taken

within a r

easonable time of the date of r

eceipt of the defective pr

oduct by us or our

authorized ser

vice center

. If the r

epairs made by us or our authorized ser

vice center ar

e

not satisfactor

y,

 notify us or our authorized ser

vice center immediately

.

DISCLAIMER OF CONSEQ

UENTIAL & INCIDENT

AL D

AMA

GES

YOU ARE NOT ENTITLED TO RECOVER FROM US ANY INCIDENT

AL DAMAGES

RESUL

TING FROM ANY DEFECT IN THE NEW CROWN PRODUCT

. THIS INCLUDES

ANY DAMAGE TO ANOTHER PRODUCT OR PRODUCTS RESUL

TING FROM SUCH A

DEFECT

SOME STSOME STSOME STSOME STSOME ST

AAAAA

TES DO NOT ALLOW THE EXCLUSION OR LIMITTES DO NOT ALLOW THE EXCLUSION OR LIMITTES DO NOT ALLOW THE EXCLUSION OR LIMITTES DO NOT ALLOW THE EXCLUSION OR LIMITTES DO NOT ALLOW THE EXCLUSION OR LIMIT

AAAAA

TIONS OFTIONS OFTIONS OFTIONS OFTIONS OF

INCIDENTINCIDENTINCIDENTINCIDENTINCIDENT

AL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMIT

AAAAA

TION ORTION ORTION ORTION ORTION OR

EXCLUSION MAEXCLUSION MAEXCLUSION MAEXCLUSION MAEXCLUSION MA

Y NOT APPLY NOT APPLY NOT APPLY NOT APPLY NOT APPL

Y TO YOU.Y TO YOU.Y TO YOU.Y TO YOU.Y TO YOU.

W

ARRANTY AL

TERA

TIONS

No person has the authority to enlarge, amend, or modify this Cr

own W

a

rranty

. This

C

rown W

a

rranty is not extended by the length of time which you ar

e deprived of the use

of the new Cr

own pr

oduct. Repairs and r

eplacement par

ts pr

ovided under the ter

ms of

this Crown W

a

rranty shall carr

y

 only the unexpir

ed portion of this Cr

own W

a

rranty

.

DESIGN CHANGES

We r

eser

ve the right to change the design of any pr

oduct fr

om time to time without notice

and with no obligation to make cor

responding changes in pr

oducts pr

eviously

manufactur

ed.

LEGAL REMEDIES OF PURCHASER

THIS CROWN W

ARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, YOU MA

Y ALSO

H

A

VE OTHER RIGHTS WHICH V

A

R

Y

 FROM ST

A

TE TO ST

A

TE. No action to enfor

ce this

C

rown W

a

rranty shall be commenced later than ninety (90) days after expiration of the

warranty period.

THIS ST

A

TEMENT OF 

W

ARRANTY SUPERSEDES ANY O

THERS

CONT

AINED IN 

THIS MANU

AL FOR CR

O

WN PR

ODUCTS.

9/90

YEAR

3

THREE YEAR

FULL WARRANTY

Telephone: 219-294-8200. Facsimile: 219-294-8301

Содержание CE 2000





















































Отзывы: