Crown CE 2000, Справочное руководство

Страница: 15 / 52

Page 15
CE-Series Amps with an Attitude!
2.3—Set the mode switch.
Turn off the amplifier before mov-
ing this switch. The Mode switch should be in the “Stereo”
position when you’re running in Stereo Mode. Stereo
Mode allows independent inputs on the left and right
channels to feed separate speakers at the output. It’s the
configuration typically chosen (by 90% of left-handed
musicians) for everyday audio applications.
Fig. 2.2
Mode Switch
Fig. 2.3
Input
Sensitivity
Switch
Turn the Mode switch to “Bridge-Mono” to have a single
input that feeds to a single output with
twice the voltage
of Stereo Mode. Use this configuration if you want to give up
stereo capabilities in order to drive your speakers louder.
(note that the wiring will also need to be changed for this
configuration—see step 6 later in this section).
2.4—Set the Input Sensitivity switch to the desired setting.
Two choices are available: 1.4 V for full rated (8-ohm) out-
put, or a fixed voltage gain of 26 dB. (The
CE-Series ship
from the factory with default settings of 1.4 V, which trans-
lates to approximately 33 dB of gain.) Refer to the infor-
mation on “Input Sensitivity” in the
Operation section
(section 3) for detailed information.