Crow RUNNER-16, Руководство по программированию

Страница: 17 / 27

17
DIALLER-Cont.
ADDRESS DESCRIPTION DEFAULT NEW
P175E 7E
OUTPUT# 1 LISTEN IN OPTIONS WHILE RUNNER IS DIALLING
1
Enabled During Dialling in Disarm State only
2 Enabled During Dialling in Armed State only
3 Enabled During Dialling in Stay Mode State only
4 Enabled Throughout the call in Disarm State only
5 Enabled Throughout the call in Armed State only
6 Enabled Throughout the call in Stay Mode State only
7 Listen-in Enabled when the panel answers a call
8 Enabled at All Times
NONE
P175E 8E
DIALLING PREFIX NUMBER – Enter a value 1-16 digits
NONE
P175E 9E
PANIC ALARM (FROM KEYPAD) CONTACT-ID REPORTING CODE
120
P175E 10E
FIRE ALARM (FROM KEYPAD) CONTACT-ID REPORTING CODE
110
P175E 11E MEDICAL ALARM
(FROM KEYPAD) CONTACT-ID REPORTING CODE
100
P175E 12E
REMOTE TELEPHONE OUTPUT CONTROL PIN NUMBER – Enter a
1-4 digit PIN (Available Only when Voice Module fitted)
0
P175E 13E
MICROPHONE ON/OFF (REMOTE VIA MOBILE) COMMAND PIN
NUMBER –
Enter a 1-4 digit PIN (Available with Voice Module Only)
0
P175E 14E
DOMESTIC/VOICE DIAL KISS OFF (REMOTE VIA MOBILE) PIN
NUMBER –
Enter a 1-4 digit PIN (Runner-8 MUST have Voice Module
fitted to be able to Kiss-Off)
0
P175E 15E
FORCE TEST CALL TO BASE STATION (REMOTE VIA MOBILE) PIN
NUMBER –
Enter a 1-4 digit PIN (Avail with Voice Module Only) A
Keypad can also Force a ‘Test Call’ – Press the < Control > & < 0 >
Buttons Together and the Dialler will report a ‘Test Call’.
0
P176E
FOR PROGRAMMING VOICE REPORTING MESSAGES, PLEASE
SEE THE INSTALLATION AND CONFIG GUIDE (
RED MANUAL)
TELEPHONE NUMBERS
ADDRESS DESCRIPTION DEFAULT NEW
P181E 1-8E
TELEPHONE NUMBER PROGRAMMING (8 NUMBERS) – Enter a 1-
16 digit phone #
NONE
P62E 1-2E
AREAS A & B MONITORING ACCOUNT NUMBER
1
= Area A and 2 = Area B
A & B = 0000
P182E 1-8E
TELEPHONE NUMBER REPORTING FORMATS
1
Contact ID
2 Domestic Dial ( Runner-8 requires Voice Module to Kiss-Off Call )
3 Pager
4 Speech Dialler (requires 90sec voice module - Part # AHPW16U )
PHONE
NUMBER
1&2 = 1 CID
PHONE
NUMBER 3-
8 = 0
P183E 1-8E
TELEPHONE NUMBER REPORTING OPTIONS
1
Stop Dialling if Kissed off
2 Monitor Call Progress
3 Blind Dial
4 Use Group Numbers for Contact ID Reporting
5 Stay On-line after Alarm report for two way voice
6 Auto Kiss-off for Voice/Domestic Reporting
7 Use the Dialling Pre-fix
8 Is to be used as the “Call-back” Number (Only For Telephone No 8)
PHONE
NUMBER
1&2 = 1,2,4
PHONE
NUMBER 3-
8 = 1,2
P184E 1-8E
MAXIMUM DIAL ATTEMPTS PER TELEPHONE NUMBER- Enter a
value 0-99
Ph# 1-8 = 3