BA_Migros_ED3EX_GB 09.02.2011 12:13 Uhr Seite 25
Probedruck
C
M
Y
CM
MY
CY CMY
K
Figure 19 – LCD Instrument Display
Switch for bike lights
Operational mode display
Speed display
Battery level display
Bike computer display
Present performance output
of the motor
Present function
of the bike computer
Clock
Recommended Mode of Operation
After switching the system on, select the operating mode and
set the ED-3EX Pedelec in motion by pedalling. On gentle
slopes, it is helpful to push the Pedelec slightly forward using
the feet so that the motor does not have to develop the propulsive
power from nil. Otherwise, the Pedelec uses a high amount of
power and cannot develop much drive at speeds between 0 –
3 km/h.
In the interests of operational distance, you should pedal as
much as possible under all driving conditions since the
operational distance lies well below the system’s capabilities
when using mainly motor power.
The activated ECO mode limits the maximum operational power
level and saves the capacity of the battery. You will only notice
the reduced assistance when going uphill and during acceleration.
Press and hold any of the four buttons on the display to switch
on the system. A graphic similar to Fig 21 will appear. With the
mode button on the right-hand side, you have the option of
selecting the assistance level.
The auxiliary actuator is automatically activated upon a half-
turn of the pedal. This means that the ED-3EX Pedelec exactly
conforms to future European standards for this type of vehicle.
The ED-3EX system has a “start assist” which is activated by a
twist grip or pressing a “Boost” button.
GB
121
Pedelec with Lithium-ion battery
