x4
Once installed and sealed,
DO NOT
use or get wet for 24 hours.
2
Installation
l
This installation guide does not include details of
waste connection; final decision about
installation of waste connection should be
made
by a
licensed plumber
.
l
Install the waste according to the installation
instructions supplied with the waste.
WARNING: D
O NOT OVERTIGHTEN
the waste
as this may cause long
-
term damage to the
bath.
We recommend to use a torque wrench to
tighten the waste by using a torque force
between 25Nm or 18.5 ft/lb and 50Nm or 36.8
ft/lb.
IMPORTANT:
This bathtub is heavy and installation requires 2 people.
Crosswater
London
cannot accept responsibility for any injuries
caused to those attempting to install this bathtub without
adequate and appropriate tools or resources.
l
Remove the bathtub carefully from the packaging.
l
Do not
drag the bathtub over rough surfaces or sharp
objects. Lift and place the bathtub into position.
l
Do not
drop the bathtub!
l
Check that the wedges have been supplied.
1
Installation - carriage
l
Place the 4 wedges in position.
l
Once sealed, the wedges can be
disposed of.
