![Crossfire MS 210Si Скачать руководство пользователя страница 22](http://html1.mh-extra.com/html/crossfire/ms-210si/ms-210si_owners-manual_2689002022.webp)
Operating Instructions and Parts Manual
MIG/STICK WELDER
16
Too thin power
cable makes the
power unstable
Change the power cable
Too low input
voltage
increase the input voltage
4
Wire will not feed
Clean or replace the liner and the
torch tip
Ground cable break
Connect ground cable
5
arc can’t be
pilot
Work piece is
greasy or rusty
Clean work piece
Torch is not
connected properly
Connect the torch again
Gas hose is kinked
or blocked up
Check gas hose
6
No shielded
gas
Gas system hose
leaks
Connect gas system and repair or
replace hose
7
Others
Please connect with our company