Released on 10/31/05 - X800058A
UV Pure Technologies Inc. © 2005
No part of this document may be photocopied, reproduced, transmitted, or translated to another language without the
prior written consent of UV Pure Technologies Inc.
For additional info call 1-888-407-9997 or email
or visit
www.uvpure.com
23
If water should fall on the unit, unplug the unit and repair leak (or add pipe
insulation to prevent condensation runoff). Dry up all remaining water and inspect
lamps for water spots and clean if necessary– see section on Replacing and
Cleaning UV Lamps. Inspect reflectors for water damage. The reflectors are the
shiny semi-circular panels attached to the inside of the side panels. The
reflectors may be wiped with a clean soft cloth. If the panels do not come clean
or are damaged, they must be replaced.
In the event of an alarm, a physical inspection of the unit with the power off
should be done to try to identify a cause. A trouble shooting guide is provided to
assist you.