Crossfire CF140L, Руководство пользователя

Страница: 48 / 59

X.
TROUBLESHOOTING
ENGINE LACKS POWER Cont.
8. C11rh11retor l11.,pectio11 - Disassemble the carburetor and check for clogs
Was the carburetor clogged and dirty'
No - SEE STEP 9
Yes - Carburetor is not serviced frequently enough
-Contaminated fuel
9.
O,·er
Heating b1spec1io11
- Check the engine for overheating
Is the engine overheating?
No -GO TO STEP 10
Yes - Excessive carbon buildup in the combustion chamber
- Use of poor quality fuel
-Clutch slipping
- Lean fuel mixture or improper octane rating of fuel
IO. Engine Co1tditio11 111!!.JJection - Accelerate rapidly through all gears and ride at high speed.
Does the engine knock?
No
- SEE STEP 11
Yes - Worn piston and cylinder (replace engine)
-Wrong type of fuel (octane rating)
- Lean fuel mixture
-Excessive carbon buildup in the combustion chamber
11.
Jg11itio11
Timing
/11spectio11
- See your local Crossfire M otorcycles dealer or motorcycle repair shop to have the ignition
timing and engine lubrication system inspected. Only attempt these procedures if you are qualified and have the proper tools
needed.
Is the ignition timing normal? (Timing is non-adjustable)
No - Faulty CDI ignition box
- Faulty ignition pulse generator
Yes
-SEE STEP 12
12.
Lubrication J11spectio11
- Remove the valve adjuster hole cap on the cylinder head and inspect for lubrication.
Is the valve train lubricated properly?
No - Clogged oil passage (replace engine)
- Dirty and/or contaminated engine oil
Yes - See your Xmotos dealer to have your motorcycle serviced.
POOR PERFORMANCE AT IDLE
&
LOW SPEED
I.
/11tt1he Mllltifo/d /11spectio11
- Check the intake manifold for leaks
Is there a leak in the manifold?
No
- SEE STEP 2
Yes
- Loose carburetor mounting bolts
- Damaged insulator/spacer
-Damaged intake manifold gasket
-Cracked or broken intake manifold/pipe
48
• :7 �� ,
_,
,
1
, .
�
�
.
,:,,
\ "
_, � .
x
SERIAL NUMBER LOCATIONS
I
VIN - Chassis Number
The VIN number is located in one of three places on the
chassis.
1. Right Side of frame.
2. Left side of frame.
3. Steering head tube.
Write this number in the VIN box on page 3.
Engine Model & Serial Number
The engine model number and serial number is stamped
on the left side of the engine under the countershaft
sprocket.
Write this number is the Engine Number box on page 3.
HANDLEBAR LEVER CONTROLS
Clutch Lever
The clutch leverO is located on the left side of the
handlebar.
Hand Brake Lever & Throttle
The hand brake lever Qand throttleC) is mounted on the
right side of the handlebar.
13