Crossfire Bed Shaker 520, Руководство пользователя

Страница: 7 / 11

12
13
Setting Up Your Bed Shaker 520
Place the Speaker unit on your night stand or
table. The Speaker is ideally set at ear level
and directed towards the sleeping person.
The Shaker unit is to be inserted between the
mattress and box springs of the bed. If there is no
box spring, the Shaker should be placed between
the mattress and the wooden support.
Press and release the Test button the verify
the unit is working properly and is sufficiently
powerful to wake the sleeper.
Be sure the Shaker is well positioned and will
not be dislodged while it is shaking the bed.
The best placement location is directly under
the sleeping person’s back.
If there are to be two people sharing the bed,
test the Shaker to ensure that it is suffient to
wake both sleepers. If not, two Bed Shakers
might be required.
Certain mattress types might not work well with
the shaker device. Always test for suitability!
Note: In order to ensure that the batteries are
installed, the Bed Shaker’s battery door cannot be
closed without all (3) batteries installed.
Be sure and route the Bed Shaker’s cord to
minimize entanglements, or interference
while making the bed or changing the sheets.
Alarm Specifications
Operating Voltage
CFCFBS520/CFBS520C 9 VDC
Standby Current
CFBS520/CFBS520C less than 10uA
Alarm Current
CFBS520/CFBS520C 2A (max.)
Battery Type (3) Duracell DL123 Lithium Manganese
Sound
520 Hz (mixed), 75dB at 10FT
Operating Ambient Temperature 40°F - 100°F (4.4°C - 38°C)
Operating Humidity 0 - 95% Non-condensing
Speaker Unit Dimensions
4.0” x 4.5” x 4.0”H
(10 cm x 11.4 cm x 10 cm)
Shaker Dimensions 3.75” x 3.75” x 1.5”H
(9.5 cm x 9.5 cm x 3.8 cm)
Weight
0.9 lbs (0.41 kg) - with Shaker
Listings UL
If you have not already done so, install the batteries and join the Bed Shaker 520
into your Crossfire radio network (see Pages 10-11).
Cleaning Your Bed Shaker 520
Gently vacuum all the outside surfaces care-
fully or wipe with a clean cloth.
Never submerge the Bed Shaker unit in
water or any other liquid, as this could
permanently damage the unit.
FCC Compliance Statement and IC Notice:
This device complies with part 15 of the FCC Rules. Per RSS-Gen, Section 8.4 This
device complies with Industry Canada licence-exempt RSS standard(s). Operation is
subject to the following two conditions: (1) This device may not cause interference,
and (2) this device must accept any interference, including interference that may
cause undesired operation of the device.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning this equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
(1) Reorient or relocate the units. (2) Increase the separation between the equipment
and receiver. (3) Connect the equipment into a different circuit from that to which the
receiver is connected. (4) Consult the dealer or an experienced technician for help.
FCC Caution and IC Caution: Any Changes or modifications not expressly approved by
the manufacturer could void the user’s authority to operate the equipment.
Route cord behind
stand and headboard
Locate shaker under
sleeper’s back
Par RSS - Gen , Section 8.4 Cet appareil est conforme avec Industrie Canada exempts
de licence standard RSS (s). Son fonctionnement est soumis aux deux conditions
suivantes : (1) ce dispositif ne doit pas causer d’interférences et (2) cet appareil
doit accepter toute interférence , y compris les interférences qui peuvent causer un
mauvais fonctionnement de l’appareil.
BedShaker Manual, Exigent Canada 2-17-16.indd 12-13 2/17/2016 5:49:09 PM