Crossfer LS8T-230V, Руководство пользователя

Страница: 4 / 14

Do not straddle or reach across the splitting area when operating
the log splitter. Never pile logs to be split in a manner that will
cause you to reach across the log splitter. Only use your hands
to operate the control levers. Never use your foot, knee, a rope,
or any other extension device. Always pay full attention to the
movement of the wedge ram. Never attempt to load your log
splitter while the ram is in motion. Keep hands out of the way
of all moving parts. Never try to split two logs on top of each
other. One of them may fly up and hit you.
When the ram of the log splitter is in the return mode, keep
your hands off the machine – the log splitter is designed to
automatically stop when the cylinder is full retracted. Keep you
hands away from splits and cracks which open in the log. They
may close suddenly and crush or amputate your hands. Do
not remove jammed logs with you hands.
It will do a better and safer job at its design rate. Don’t use log
splitter for a purpose for which it was not intended. Do not,
under any circumstances, alter your log splitter. This equipment
was designed and engineered to be used in accordance with
the operating instructions. Altering the equipment, or using the
equipment in such a way as to circumvent its design capabilities
and capacities, could result in serious or fatal injury and will
void the warranty. Never try to split logs larger than those
indicated in the specifications table. This could be dangerous
and may damage the machine.
Don’t leave tool until it has come to a complete stop.
AVOID INJURY FROM UNEXPECTED ACCIDENT
PROTECT YOUR HANDS
DON’T FORCE TOOL
NEVER LEAVE TOOL RUNNING UNATTENDED
Keep proper footing and balance at all times. Never stand on
log splitter. Serious injury could occur if the tool is tipped or if
the cutting tools is unintentionally contacted. Do not store
anything above or near the log splitter where anyone might
stand on the tool to reach them.
DON’T OVERREACH
l
l
l
l
l