CCpilot X900
Revision 1.1
Technical Manual
2020-02-03
www.CrossControl.com
3
Revision history
Rev
Date
Author
Comments
1.0
2019-10-14
Finn Mc Guirk
1.1
2020-02-03
Finn Mc Guirk
Minor formatting changes
1.
Introduction
CCpilot X900, is a display computer that belongs to a family of CrossControl computers including
CCpilot XM2 and CrossCore XM2. The CCpilot X900 and CCpilot XM are in most cases very
similar in functionality and usage. It is an x86 based on board display computer and controller with
a rich set of integrated functions. With its powerful Intel Atom quad core CPU with Linux or Android
it is an open platform that facilitates easy implementation of premium user interaction, reliable
controls and integrated fleet management.
This technical manual and reference handbook provides important information regarding the
hardware and basic usage. For software and operating system specifics please refer to additional
XM2 documentation.
[1]
CC Linux – Programmers Guide
[2]
CC Linux – Software Guide
1.1.
Conventions and Definitions
The observe symbol is used to highlight information in this document.
The exclamation symbol is used to highlight important information.
Text formats used in this document.
Format
Use
Italics
Paths, filenames, definitions
Bold
Command names and important information
1.2.
Identification
On the side of the CCpilot X900 device there is a label containing version and serial numbers
which identify your unique computer. Take note of them. During service and other contact with the
supplier it is important to be able to provide these numbers.
1.3.
Care
During service on the machine, all cables to the CCpilot X900 device shall be
disconnected.
Serviced shall only be made by authorised personnel. If the unit is opened by
unauthorised personnel, the guarantee will cease to be valid.
