CCpilot V1000/V1200
Revision: 1.0
Technical Manual
2022-04-01
www.crosscontrol.com
21
There is no device-internal CAN bus termination, therefore bus termination must be applied
externally.
6.6.
Ethernet
CCpilot V1000/V1200 has one Ethernet interface in M12 connector 3 supporting 10BASE-
T/100-BASE-TX/FX/1000-BASE-T and Auto-MDIX.
The Ethernet interface is galvanic isolated with 1.5 kV
AC
insulation voltage.
Shielded cables should be used to ensure reliable communication and electromagnetic
compliance. As with all Ethernet enabled devices, connecting the device to a public network
environment may impose an IT security threat.
6.7.
USB
The CCpilot V1000/V1200 has two USB ports. One of them is a USB 2.0 port located in the
M12 connector 4 and the other one is a USB 3.0 port located in a USB-C connector on the
backside of the device.
The USB-C port supports a USB OTG interface, i.e. acting as both host and device. Using the
port in USB device mode is only for OS updates through a connected PC with the appropriate
tool installed.
In USB host mode, both USB ports can be used for application data transfer or the connection
of a peripheral such as a mouse or keyboard.
The M12 USB 2.0 port can supply up to 500 mA and the USB-C port up to 900mA. Both ports
are internally over current and short circuit to ground protected. Shielded cable shall be used to
ensure reliable communication and electromagnetic compliance.
Due to the M12 connector specification, USB data signal integrity cannot be guaranteed with
higher speeds than full-speed USB (12 Mbps). However, hi-speed operation is supported by
the USB host controller.
6.8.
Bluetooth and Wi-Fi
Product models for CCpilot V1000/V1200 with 4 CAN, Wi-Fi, and Bluetooth have a built in
Bluetooth and Wi-Fi module to facilitate wireless communication to and from the device. The
Linux based operating system in the CCpilot V1000/V1200 includes a software Bluetooth stack
for easy application development including adding Bluetooth functionality.
Refer to the CCpilot V1000/V1200 Programmers manual guide for details about implementing
Bluetooth and Wi-Fi functionality in user applications.
Bluetooth and Wi-Fi module and communication specifications:
Items
Specification
Radio module certificates
FCC/IC/CE/RCM
Antenna Type
Internal
Wireless specification
802.11 a/b/g/n/ac
Bluetooth version
V5.0 Dual Mode – BR / EDR / LE
Frequency range
2.402 – 2.480 GHz, 5.15 – 5.825 GHz
Temperature range
The Bluetooth and WiFi module is operational in the
CCpilot
V1000/V1200’
s full temperature range
