2.5.4 Gain Changes
When you get to this menu note that gain changes will be made as you make them but if you do not wish to save
the changes you have made, scroll to “R” and push the menu/Execute switch and select “NO” in the “SAVE
SETTINGS?” window or do not press the Menu/Execute switch; simply do nothing for approximately 30
seconds, and the system will return to the normal operating mode.
NOTE: THE GAIN WILL CHANGE AS YOU ADJUST THE NUMBERS. HOWEVER, THE
VALUE WILL NOT BE STORED UNTIL YOU INDICATE YES IN THE SAVE SETTINGS
WINDOW. DO NOT SET A GAIN THAT WOULD EXCEED 0 dBm OR HAVE LESS
THAN -20 dBm OUTPUT LEVEL.
Press the Up/Down switch to change the gain in 0.5 ±0.5 dB steps and then push the
Menu/Execute switch to get to the Save Settings Menu:
GAIN = +30.0
R
When the display indicates the value desired you can push the Menu/Execute switch to the next item
OR you can scroll to “R”, push the Menu/Execute switch to get to:
SAVE SETTINGS?
Y N
Selecting Y will save the new settings. Selecting N will revert to the previous settings.
Figure 2.4 (page 17) gives the menu items and how to make changes.
3116-7786-2150 Manual, Rev. 0
Page 14
11/24/20
