Cross Technologies 2083-914A, Инструкция по эксплуатации

Страница: 14 / 18

95 > 140 TRANSLATION MODE 140 MHZ END OUTPUT CENTER FREQUENCY CHANGES :
To change the 140 MHz end frequency, push the Menu/Execute switch until you get to:
IF OUT= 140 MHz R
Press the Up/Down switch to change the frequency in 1 or 10 MHz steps.
IF OUT= 150 MHz R
By using the horizontal rocker switch the cursor can be moved left or right.
IF OUT= 150 MHz R
Pressing the Up/Down switch down will toggle the digit selected until you have the desired frequency.
NOTE: CHANGES DO NOT TAKE PLACE ON FREQUENCY UNTIL YOU GO TO THE SAVE
MENU AND INDICATE YOU WANT TO SAVE THE CHANGES. THE CARRIER IS MUTED
WHEN FREQUENCY IS CHANGED.
When the display indicates the value desired you can push the Menu/Execute switch to the next item OR
you can scroll to “R”, push the Menu/Execute switch to get to:
SAVE SETTINGS? Y N
Selecting Y will save the new settings. Selecting N will revert to the previous settings.
Pushing the Menu/Execute switch then takes you to the :
95 > 150
ATN=00 REF=INT
Figure 2.4 gives the menu items and how to make changes
2083-914A Manual Page 14 9/27/10