Cross Technologies 2017-03A, Инструкция по эксплуатации

Страница: 4 / 21

1.2 Technical Characteristics
TABLE 1.0 2017-03A Up/Downconverter Specifications*
---UPCONVERTER---
Input Characteristics (IF)
Impedance/Return Loss
75
Ω
/18 dB
Frequency 70 ± 18 MHZ
Input Level -40 to -10 dBm
Output Characteristics (RF)
Impedance/Return Loss
75
Ω
/12 dB
Frequency 950 to 1525 MHz
Output level -35 to -15 dBm
Output 1 dB compression -10 dBm
Channel Characteristics
Gain range (adjustable)
-25 to +15 dBm, 1 dB steps
Frequency Sense Non-inverting
---UP & DOWNCONVERTER---
Channel Characteristics
Frequency Response
± 1.5 dB, entire band; ± 0.5 dB, 36 MHz BW
Spurious Response <-50 dBC
Group Delay, max. 0.01 ns/MHz2 parabolic; 0.03 ns/MHz linear; 1 ns ripple
Synthesizer Characteristics
Frequency Accuracy
±1.0 ppm internal reference (±0.01 ppm option H) internal reference
Frequency Step 1 MHz (125 kHz, option X)
-120 -100 -85 -75 -75
1MHz 100kHz 10KHz 1KHz 100 Hz
dBC/Hz
Phase Noise @ F (Hz)>
10MHz Level (In/Out) 3 dBm ± 3 dB, 75 ohms (option -E)
Controls, Indicators
Frequency Selection
Direct readout LCD; pushbutton switches or remote selection
Gain Selection Direct readout LCD; pushbutton switches or remote selection
Power; Alarm; Rem; Mute Green LED; Red LED; Yellow LED; Red LED
Remote RS232C, 9600 baud (RS485, option Q)
Other
RF Connectors
Type F (female) (see Table 2.2 for connector options)
IF Connectors BNC (female) (see Table 2.2 for connector options)
10MHz Connectors BNC (female), 50/75
Ω
(option E)
Alarm/Remote Connector DB9, male - NO or NC contact closure on alarm
Size 19 inch standard chassis 1.75” high X 16.0” deep
Power 100 - 240 (±10% VAC), 47 - 63 Hz, 25 watts max.
Options
E - External 10 MHz ref Connectors/Impedance
H - High Stability (±0.01ppm) internal ref B - 75
Ω
BNC (RF), 75
Ω
BNC (IF)
Q - RS485 Remote Interface C - 50
Ω
BNC (RF), 75
Ω
BNC (IF)
L- LNB Voltage, +24VDC, 0.5 amps D - 50
Ω
BNC (RF), 50
Ω
BNC (IF)
T - Temperature Sensor J - 75
Ω
F-type (RF), 50
Ω
BNC (IF)
V - SSPB Voltage, +24 VDC, 2.5 Amps N - 50
Ω
N-type (RF), 75
Ω
BNC (IF)
X - 125 kHz frequency steps M - 50
Ω
N-type (RF), 50
Ω
BNC (IF)
X1 or X1- 125 or 100 kHz Frequency Steps
Connector Options: See Table 2.2
*+10˚C to +40˚C; Specifications subject to change without notice
2017-03A Manual, Rev. I Page 4 07/22/19
---DOWNCONVERTER---
Input Characteristics (RF)
Impedance/Return Loss
75
Ω
/12 dB
Frequency 950 to 1525 MHz
Noise Figure, Max. 15 dB @ max. gain
Input Level range -60 to -10 dBm
Input 1 dB compression -5 dBm @ 0 dB gain
Output Characteristics (IF)
Impedance/Return Loss
75
Ω
/18 dB
Frequency 70 ± 18 MHZ
Output Level -10 to 0 dBm
Output 1 dB compression +5 dBm
Channel Characteristics
Gain range (adjustable)
0 to +50 dB
Image Rejection > 50 dB, min.
Frequency Sense Inverting
Non-inverting