Cross Technologies 2017-03, Инструкция по эксплуатации

Страница: 11 / 21

Tables 2.1 & 2.2 shows the input and output connectors on the rear panel.
TABLE 2.1 J1 10 2.1 J 10 Pinouts (RS-232C/422/485*)
Pin Function
1 Rx-
2 Rx+ (RS-232C)
3 Tx+ (RS-232C)
4 Tx-
5 GND
6 Alarm Relay: Common
7 Alarm Relay: Normally Open
8 Not Used
9 Alarm Relay: Normally Closed
*Remote Serial Interface
Interface: DB-9 Male -- Protocol: RS-232C (RS-232C/422/485 option -Q),
9600 baud rate, no parity, 8 data bits, 1 start bit, 1 stop bit.
TABLE 2.2 IFF/RF 2.2 I F/RF Connector Options Options
Option IF RF
STD BNC, 75 Ω Type F, 75 Ω
-B BNC, 75 Ω BNC, 75 Ω
-C BNC, 75 Ω BNC, 50 Ω
-D BNC, 50 Ω BNC, 50 Ω
-J BNC, 50 Ω Type F, 75 Ω
-N BNC, 75 Ω Type N, 50 Ω
-M BNC, 50 Ω Type N, 50 Ω
-S BNC, 50 Ω SMA, 50 Ω
2017-03 Manual, Rev. N Page 11 03/22/18