1.2 Technical Characteristics
TABLE 1.0 2005-10 Upconverter Specifications*
Input Characteristics
Impedance
50
Ω
Return Loss
15 dB
Frequency
70 or 140 MHz center, ± 20 MHz
Level
-10 to -25 dBm (LOW GAIN)
-25 to -40 dBm (HI GAIN)
1dB compression
0 dBm (LOW GAIN)
-15 dBm (HI GAIN)
Output Characteristics
Impedance
50
Ω
Return Loss
12 dB
Frequency Range
2.0 to 2.5 GHz
Channel Characteristics
Gain
-30 dB ± 3 dB (LOW GAIN)
-10 dB ± 3 dB (HI GAIN)
Spurious Response
< -40dBC max, < -45dBC typ;
OUTPUT NOT FILTERED
Frequency Response
± 2 dB, 2.0 - 2.5 GHz; ± 0.5 dB, any 10MHz increment
Synthesizer Characteristics
Frequency Accuracy
± 25 kHz max
Frequency Step
1.0 MHz minimum
-100
-90
-75
-70
-70
1MHz
100kHz
10kHz
1kHz
100 Hz
dBC/Hz
Phase Noise @ Freq
Indicators
DC Power
Green LED
PLL Alarm
Red LED
Other
RF, IF Connectors
BNC (female)
Size, Bench Top
4.7” wide X 1.75” high X 6.5” deep
Size, Rack Mount
19 inch standard chassis 1.75”high X 7.0” deep (
option -R
)
AC Power
120 VAC, 60 Hz, 10W max wall mount power supply (
option -P
) or
100-240 ±10% VAC, 47-63 H, wall mount power supply (
option -P4
)
*+10 to +40 degrees C; Specifications subject to change without notice
2005-10 Manual, Rev. B
Page 4
4/28/09
