1.4 M&C Commands
The following tables summarize the commands and status queries applicable to the
1582-10M Protection Switch.
*
PLEASE NOTE:
The two character {aa} prefix, shown in the table below, is present ONLY when RS485 is selected.
Table 2.0 Model 1582-10M - M&C Remote Commands
x = 1: enables min. auto switching mode
where:
{aaCMx}
In Auto Switching Mode
x = 2: remote select CH2
x = 1: remote select CH1
x = 0: disables min. auto switching mode
x = 0: clears remote selections
where:
{aaCRx}
Remote Select
Description
Syntax
Commands
Table 2.0: Model 1582-10M M&C Remote Commands
1.5 M&C Queries
Table 2.1 Model 1582-10M - M&C Status Commands
X = 1 if
min. auto switching is enabled
X = 0 if
min. auto switching is disabled
returns:
{aaSMx} where:
{aaSM}
In Auto Switching Mode Status
X = 2 if CH2 is remotely selected
X = 1 if CH1 is remotely selected
X = 0 if no remote selections
returns:
{aaSAx} where:
{aaSR}
Remote Select Status
returns:
{aaSV 1582-10M v 400} model # & firmware version
{aaSV}
Model # and firmware version
Description
Syntax
Commands
Table 2.1: Model 1582-10M M&C Status Commands
Continued on page 7 ...
1582-10 Manual
Page 6
1/22/09
