manualshive.com logo in svg

Cross point MS-500 Series, Руководство по эксплуатации

Поделиться
Скачать
Cross point MS-500 Series Скачать руководство пользователя страница 14

Rev D 

 

Model MS-500x 

CrossPoint Technologies, Inc 

9 

 

4.4.4 

Remote/Local Control 

 
From the connection screen, pressing MENU will bring up the first Menu heading. Scroll through 
the top level items using the UP/DN keys. Press ENT to step into a selection and view the current 
setting. Press ENT again to step into the list of choices. Choices are viewed by scrolling UP/DN. 
Press ENT to select a new parameter value. Press ESC to back up one level in the menu and 
abandon any changes. The first MENU screen will look like this: 
 
 

 

Control : Local 
ENT: Edit      ESC: Back 

  UP    IN  MENU  1      2      3      4       5    ESC 

  DN   OUT OFF   6      7       8      9      0     ENT 

  FLT       PS 

 
The Matrix is in Local mode unless the remote computer has taken over the matrix. If the screen 
shows “Remote”, front panel control is disabled. (Matrix settings can be viewed but not changed). 
When the system is in Remote mode, control can be acquired by pressing ENT to step into this 
menu item. Press UP or DN until the screen shows Local, as in the picture below. The bottom line 
instruct the operator to press ENT to confirm this change to Local mode. Pressing ESC will 
abandon the change, and back up one level to the top menu list.  
 
The system may also be in Local Lockout mode. In this mode, the remote computer has absolute 
control. This menu item cannot be used to regain control from a Local Lockout condition. The 
remote computer must place the Matrix into either Remote or Local modes or power must be 
cycled to release a Local Lockout.  
 
 

 

Control : Local 
ENT: Select    ESC: Quit 

  UP    IN  MENU  1      2      3      4       5    ESC 

  DN   OUT OFF   6      7       8      9      0     ENT 

  FLT       PS 

 
 

4.4.5 

Status 

 
The next top level Menu item, “Status”, displays details from the built in test circuits. This example 
shows a Fault reported. The Red FLT lamp will be lit at all times when any fault is detected. If the 
problem is a power supply, the PS LED will be lit. Switches with redundant power supplies will 
have two L

ED’s for this purpose. Press ENT to drop down and view details. 

 
While in these menus, the screen is not updated dynamically. Changes to any fault status 
information are displayed once for that screen. To see the effect of changes, you must navigate 
out of that screen and re-enter to refresh the screen data. 
 
 

Содержание MS-500 Series









































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды