A
T R A D I T I O N A L S E R I E S C O T T A G E R O O F F R E E S T A N D I N G M O D E L • G R E E N H O U S E I N S T R U C T I O N S
Installing the Roof Glass
INSTALLATION
• Install the glass by setting it in the
horizontal gutter piece and letting
it down slowly to the foam strip. If
everything is square, level and
plumb (straight), the glass should
fit. If the glass does not fit - move
the Ridge to either the right or left
until a fit is obtained.
• Install the bottom row of glass on
the roof first.
• Attach and fasten the Caps (caps
are 1/2" shorter than the glass).
(See Pic. A).
• Put in the second row of Roof
Glass overlapping the first 1/2".
Settle the glass against the cap.
(See
Pic. B).
• The second row of caps are 1"
longer than the glass. When you
put them on, the first hole in the
cap lines up with the last hole in
the previous cap.
• Before you lay down the second
row of glass, cut a 8" (plus/minus)
piece of foam and lay it against the
first piece of glass and on top of
the existing foam (it fills the space
of the overlap).
• After you have finished the second
row – the third row is installed the
same way.
• Last row below the Ridge – the
glass slips in underneath the Ridge
flange.
• When the side of the roof is done,
seal the glass below the Ridge and
around the vent frame with
silicone or caulking. Do the
opposite side the same way.
– 31 –
B
Содержание Traditional Series
Страница 1: ...ACF Greenhouses...