Cross Country Greenhouses Traditional Series, Инструкция по эксплуатации

Страница: 10 / 55

T R A D I T I O N A L S E R I E S C O T T A G E R O O F F R E E S T A N D I N G M O D E L • G R E E N H O U S E I N S T R U C T I O N S
1. The 1” x 2” angle / base
(Page 4, #9) laying on the
ground should have the 1”
side (with the slot punches
out) facing up
(Page 7, #1) .
(See Pic A.)
2. Bolt the corner post (Page
4, #5) onto the base angle
(Page 7, #2) . (See Pic B.)
3. Bolt on all the end bars
(Page 4, #2) to the base.
Make sure that the longest
bar is in the center of the
back wall
(Page 7, #3) and
the angle of the other bars
are sloping downward.
4. End Rafter (Page 4, #3) .
When fastening end rafters
to the cornerpost, leave a
1/8” space for gutters.
(Page 7, #4). Pic .
5. Bolt the angle/channel
cross brace approx. 60”
from the base with 1/4” x
1/2” bolts
(Page 7, #5) .
Pic .
6. The short angle/channel
cross brace is bolted on at
the top
(Page 7, #6) .
D
C
Lay out the back pieces into the shape of an end wall. All glass bars have a track for the bolts. The
track must face up towards you when you assemble the gable ends. Slide the bolts in to the ends or
use the notches that are punched out in the glass bars. Refer to the line/detail drawings when
assembling. (
the sketches/drawings/pictures are viewed from inside the greenhouse).
A B
Back Gable End Assembly
– 9 –
C
D
Base
Corner
Post
Base
G
la
s
s
B
a
r
End
Ra
fter
Corner
Post
ACF Greenhouses