TROUBLE SHOOTING GUIDE
The unit does not operate.
* The AC power cord is not connected to a power outlet.
* The unit is not turned on : rotate the FUNCTION knob from the
OFF position to turn on the unit.
No radio
* The FUNCTION switch is not in the correct position. Turn
FUNCTION switch to RADIO.
* Adjust the VOLUME knob.
* Rotate the TUNING knob to find a radio station.
Cassette tape cannot be inserted
* The cassette tape is inserted in the wrong position.
No cassette playback
* The cassette tape is not pushed all the way in.
* Adjust the volume knob.
* The cassette has reached the end of the side being played, Eject
the cassette, take out tape, flip over the cassette and reinsert.
POWER SOURCE
Unwind the AC power cord at the back of the unit and connect it to
a power outlet.
RADIO OPERATION
1. Switch the unit ON by turning the FUNCTION switch (6) to the
RADIO position.
2. Place the VOLUME controls (7) in mid-range position.
3. Select the desired waveband by placing the BAND selector (5) in
either the AM or FM position.
4. Open the DIAL DISPLAY DOOR (2). Select the desired station on
the DIAL DISPLAY by rotating the TUNING KNOB (4).
5. Re-adjust the VOLUME controls (7) to suit your personal preference.
6. Switch the unit OFF by turning the FUNCTION switch (6) to the
OFF position.
ANTENNA
For FM operation, the unit is provided with a wire. Move the wire until
the reception is clear and with no interference. Do not connect external
FM antenna to an outside antenna.
CASSETTE OPERATION
1. Switch the unit ON by turning the FUNCTION switch (6) to the
TAPE position.
2. Insert a pre-recorded cassette tape into the tape slot, with the
exposed piece of tape facing down, by pushing the cassette against
the CASSETTE DOOR (9). The cassette will slide into the tape
mechanism and the radio which will have been playing until now,
will be automatically cut-off, once this occurs. Note: One end of
the cassette tape will remain visible.
3. Re-adjust the VOLUME controls (7) to suit your personal preference.
4. The cassette can be advanced in the fast forward mode, by pressing
the EJECT /F.F button (10) half-way in. Pushing the EJECT / F.F
button (10) again will stop the fast forward mode and return the
tape mechanism to the play mode.
5. Pressing the EJECT / F.F button completely in, will eject the cassette
from the unit. At this time, radio operation will resume.
6. When the tape reaches its end in the play mode, the cassette will
automatically stop and radio operation will resume.
LOCATION OF PARTS
1. SPEAKER
2. DIAL DISPLAY DOOR
3. DIAL DISPLAY
4. TUNING KNOB
5. AM / FM BAND SWITCH
6. FUNCTION SWITCH
7. VOLUME CONTROL
8. POWER PLUG
9. CASSETTE DOOR
10. EJECT / F.F BUTTON
11. FM ANTENNA
12. FLASH ON / OFF SWITCH
