English
6
Initial Setup
Essential Setup
1. Slide the
Turntable Lock
to the right to release the turntable deck and place
the turntable on a flat and level surface. The selected location should be
stable and free from vibration.
2. Remove the tie-wrap that is holding the tonearm.
3. Connect AC adaptor to the
Power Jack
of the unit.
Note: Do not plug the AC power adaptor to power outlet before all the assembly is
completed. Before turning the power on, make sure again all the connection settings
are correct. Always turn off the power when connecting or disconnecting.
Aux Input Connection
You can connect an audio device to this unit and play your music through its
speakers. To do this, set the
Function Switch
to the Aux mode, and connect the
3.5mm auxiliary cable between your audio device and the
Aux In Jack
of this
unit and start playing.
Turntable Operation
1. Set the
Function Switch
to PHONO position.
2. Set the
Speed Switch
accordingly.
3. Place the record on the turntable. Use the
45 RPM Adapter
if necessary.
4. Remove the stylus protector from the stylus assembly.
Note: To avoid stylus damage, make certain the included stylus guard is in place
whenever the turntable is being moved or cleaned.
5. Release the tonearm
Hold Down Clip
.
Note: when the turntable is not in use, remember to lock back hold down clip.
6. Lift up the
Tonearm
and move it over the record where play is desired to
begin. Gently put down the
Tonearm
and begin the playback.
7. When the record is finished playing, gently lift up the
Tonearm
and move it
back to the
Tonearm Rest
.
8. Lock the
Hold Down Clip
to secure the tonearm.
Tone Control
Slide the Tone Control can adjust the treble level of the turntable.
