English
8
CD Operation
Playing a CD
1. Slide the
Function Switch
to CD.
2. Press the
Open/Close Button
to open the
CD Drawer
. Place a disc in the
tray with the labeled side of the disc facing up.
3. Press the
Open/Close Button
again to close the
CD Drawer
. The display will
show “---“ for a few seconds while reading CD information, then the total
number of tracks on the disc will be displayed.
“00” will be shown when there
is no disc inside the unit.
4. Press the
Play/Pause Button
to start playback. The
Play/Pause Indicator
will light up.
5. Adjust the
Volume Knob
to the desired volume level.
6. To pause playback, press the
Play/Pause Button
. The
Play/Pause Indicator
will flash. Press the
Play/Pause Button
again to resume playback.
7. To stop playback, press the
Stop Button
and the
Play/Pause Indicator
will
go off.
Skip Forward And Skip Reverse
1. Press the
Forward Skip Button
or the
Backward Skip Button
to select a
track.
2. Press the
Play/Pause Button
to start playing the selected track.
Search Forward And Reverse During Play
Playback
1. Press and hold the
Forward Skip Button
or the
Backward Skip Button
to
search forward or backward though the selected track.
2. Release the button at the desired point, playback will resume automatically.
Repeat Playback
1. To repeat a single track, choose the track that you want to repeat, then press
the
Play/Pause Button
to start the track. Press the
Repeat Button
once to
repeat this track. The
Repeat Indicator
will flash.
2. To repeat all tracks, press the
Play/Pause Button
to start the CD. Press the
Repeat Button
twice to repeat all tracks. Once the CD ends, it will start over
again from the beginning of the CD. The
Repeat Indicator
will remain on.
3. To erase the repeat function, press the
Repeat Button
again until the
Repeat
Indicator
is off.
Programmed Playback
1. Press the
Program Button
. "01" will be shown on the display and the
Program Indicator
will flash.
2. Press the
Forward Skip Button
or the
Backward Skip Button
to select a
track.
3. Press the
Program Button
again to store the selected track number.
4. Repeat steps 2 and 3 above to program other tracks.
5. Press the
Play/Pause Button
to start programmed playback. The
Program
Indicator
will be on.