English
7
Turntable Operation
1. Push the
Power Button
to turn on the power.
2. Slide the
Function Switch
to PHONO
3. Set the
Speed Control Switch
to the desired speed (33 1/3, 45, or 78 RPM).
4. Place the record on the turntable. Use the
45 RPM Adapter
if necessary.
5. Remove the stylus protector from the stylus assembly.
Note: To avoid stylus damage, make certain the included stylus guard is in place
whenever the turntable is being moved or cleaned.
6. Lift up and pull the
Tone Arm
slightly to
the right side until hear the “click”
sound to activate the
Turntable
.
7. Move the
Tone Arm
by hand to the record and slowly lower it to the desired
starting point. Turn the
Volume Knob
to adjust the volume to the desired
level.
8. At the end of the record, the
Tone Arm
will stop automatically. You must
return the
Tone Arm
to
Tone Arm Rest
by hand.
Radio Operation
1. Slide the
Function Switch
to RADIO.
2. Press the
AM/FM Button
to the select the desired tuning band.
3. Select the desired radio station by rotating the
Tuning Knob
.
4. Adjust the
Volume Knob
to the desired sound level.
Note: the unit is provided with a FM Wire Antenna, move the wire until the reception is
clear and with no interferences. For AM reception, the unit is provided with a directional
build-in ferrite antenna. Rotate the set to find the position in which the best reception is
obtained. Do not connect the FM Wire Antenna to any outside antenna.
Bluetooth Operation
1. Press the
Function
button to switch to Bluetooth mode.
2. The LED indicator will flash indicating that it is searching for a nearby
Bluetooth enabled device to connect to.
3. On your Bluetooth enabled device, search for nearby devices. When your
device finds “CR44” connect to this device. There should be no requirement
for a PIN.
4. When the unit has connected to your Bluetooth enabled device successfully,
your device will indicate that they are connected and the indicator light on the
Bluetooth. The unit will stop flashing and continuously illuminate.
