English
7
Turntable Operation
1. Turn the Power Knob clockwise to turn on the power.
2. Set the
Speed Switch
accordingly
Note: When 33 RPM is selected the Speed Switch LED will be red. When 45 RPM is selected
the Speed Switch LED will be green.
3. Place the record on the turntable. Use the
45 RPM Adapter
if necessary.
4. Remove the stylus protector from the stylus assembly.
Note: To avoid stylus damage, make certain the included stylus guard is in place whenever
the turntable is being moved or cleaned.
5. Press the
Start/Stop Button
to start the turntable platter
’s rotation.
6. Release the tonearm
Hold Down Clip
.
Note: when the turntable is not in use, remember to lock back hold down clip.
7. Use the
Cue Lever
to lift up the tonearm.
8. Gently move the tonearm over the record where play is desired to begin. Set the
Cue Lever
back to the down position, the tonearm will descend slowly onto the
record and begin to playback.
9. When the record is finished playing, use the
Cue Lever
again to raise the tonearm
and then return it to the
Tonearm Rest
. Release the lever to let the tonearm sit
back at its rest. To suspend the playback, repeat the same steps.
10. Lock the
Hold Down Clip
to secure the tonearm.
11. Press the Start/Stop Button again to stop the turntable platter
’s rotation. Turn the
Power Knob counter-clockwise to turn off the power.
Anti-skate Adjustment
•
A small outward “anti-skating” force can be applied to the tone arm to compensate
for the “skating” force that pulls the arm toward the center of the record.
•
For best performance during normal turntable usage, it is recommended to set the
anti-skate control knob to the same value as indicated by the downforce scale dial.