- 8 -
2.
- Attach a washer to the rear axle.
- Put a hubcap.
- Put a tire marked ‘L’.
- Pull a pin through (with the ring end as shown).
- Connect all the parts.
4.
- Bring the other rear wheel pin on the rear axle. Ensure
that the rear wheel pin is set on the motor correctly.
- Pull a pin with the ring end inwards as shown above.
- Put a tire marked ‘R’ with the flat side inwards as shown
above.
- Then, attach a wheel cap with the vaulted side outwards
as shown.
- Put a washer.
5.
- Finish assembling the rear axle by fixing everything with
a fixing pin.
3.
- Lay the vehicle down on its top side.
- Position the rear axle as shown. Ensure that the rear
wheel pin is set on the motor correctly.