- 7 -
ASSEMBLY INSTRUCTIONS
•
Insert the connecter A into the charger jack.
•
Then connect the charger to the socket on the wall.
•
The vehicle must be turned off!
Instructions:
- Use the charger only on one wall socket. Because of its own
weight, the charger mustn’t be connected to an overhead
socket.
- If the wall socket has a switch, ensure that it is on and there is
power supply.
- Charge the batteries 18-22 hours before the first operation.
Do not charge them longer than 30 hours once.
- When the batteries are completely empty, charge them at
least 14 hours. Do not charge them longer than 30 hours
once.
- After charging, disconnect the connector from the vehicle and
the charger from the socket.
WARNING
In the loose delivery status of the vehicle,
children may hurt themselves with sharp parts
or electric components.
Please be careful while opening the package,
assembling the small parts and attaching or
handling the batteries (especially when you are
assembling the vehicle with your child).
1.
Connect a fixing pin to the end of the rear axle.