Cronologic xTDC4, Руководство пользователя

Страница: 9 / 32

Pin Name
1, 2 GND
3, 4 external CLK in N, external CLK in P
5, 6 GND
7, 8 reserved/NC
9, 10 GND
11, 12 reserved/NC
13, 14 GND
15, 16 reserved/NC
17, 18 GND
19, 20 reserved/NC
21, 22 GND
23, 24 reserved/NC
25, 26 GND
27, 28 reserved/NC
29, 30 GND
31, 32 reserved/NC
33, 34 GND
Table 2.1: Pinout of connector C2.
in order to comply with a manifold of single ended signal standards enabling the acquisition of
positive or negative pulses.
B
C2
C1
S
S
C
D
A
C3
Figure 2.3: Schematic view of a xTDC4 board showing inter-board connectors C1 and C2.
Furthermore, three board interconnection connectors can be found at the top edge of the
board, as displayed in Figure 2.3 on page 4 . Connector C1 (labelled J25 on the board) is
reserved for future use. The pinout of connector C2 (labelled J12 on the board) is given in
Table
2.1 and the pinout of connector C3 (labelled as J6 on the board) is depicted in Table 2.2 .
cronologic GmbH & Co. KG 4 xTDC4 User Guide