Cronologic xTDC4, Руководство пользователя

Страница: 31 / 32

5.2.4 Power Supply
Symbol Parameter Min Typical Max Units
I PCIe 3,3V rail power consumption 4 mA
VCC PCIe 3,3V rail power supply 3,1 3,3 3,5 V
I PCIe 12V rail power consumption 2,1 A
VCC PCIe 12V rail power supply 11,1 12 12,9 V
I PCIe 3,3VAux rail power consumption 0 A
VCC PCIe 3,3VAux rail power supply 3,3 V
5.2.5 Inputs
The xTDC4-PCIe’s inputs are AC-coupled 50Ω single ended.
Symbol Parameter Min Typical Max Units
V
Base
Baseline shift V
t
Pulse
Pulse length 2 5 200 ns
Z
P
input impedance 50 Ω
5.3 Information Required by DIN EN 61010-1
5.3.1 Manufacturer
The xTDC4 is a product of:
cronologic GmbH & Co. KG
Jahnstraße 49
60318 Frankfurt
HRA 42869 beim Amtsgericht Frankfurt/M
VAT-ID: DE235184378
5.3.2 Intended Use and System Integration
The devices are not ready to use as delivered by cronologic. It requires the development of
specialized software to fulfill the application of the end user. The device is provided to sys-
tem integrators to be built into measurement systems that are distributed to end users. These
systems usually consist of the xTDC4, a main board, a case, application software and possi-
ble additional electronics to attach the system to some type of detector. They might also be
integrated with the detector.
The xTDC4 is designed to comply with DIN EN 61326-1 when operated on a PCIe compliant
main board housed in a properly shielded enclosure. When operated in a closed standard
compliant PC enclosure the device does not pose any hazards as defined by EN 61010-1.
Radiated emissions, noise immunity and safety highly depend on the quality of the enclosure.
It is the responsibility of the system integrator to ensure that the assembled system is compliant
to applicable standards of the country that the system is operated in, especially with regards
to user safety and electromagnetic interference. Compliance was only tested for attached cables
shorter than 3m.
cronologic GmbH & Co. KG 26 xTDC4 User Guide