8
How to Assemble
Operating Instructions
USING YOUR CHOCOLATE FONDUE FOUNTAIN
1)
Find a stable surface near an electrical outlet before starting.
2)
The unit MUST BE LEVEL to operate properly.
3)
Make sure your cord or extension is away from any contact with water.
4)
SWITCH POSITIONS-LEFT is for the MOTOR, RIGHT is for the HEATER.
MOTOR CONTROL
HEATER CONTROL
How to Use
WARNING: ALWAYS ASSEMBLE THE PRODUCT COMPLETELY BEFORE PLUGGING IT
INTO AN ELECTRICAL OUTLET.
INSTRUCTIONS:
1)
Turn the switch on the right of the unit to start the heater on THE FONDUE
FOUNTAIN.
2)
Let the unit WARM UP for AT LEAST 3-5 MINUTES before adding the liquid.
3)
While the machine is warming up:
a.
PREPARING THE CHOCOLATE:
i.
The quickest way to prepare the chocolate for the fountain is
by slightly melting the chocolate in the microwave
ii.
Combine 3 cups of chocolate chips with ¾ to 1 cup of cooking
oil.
iii.
Other liquid flavors can be added at this time.
4)
Place in microwave and cook for 2 ½ minutes, when done stir chocolate. If
necessary reheat the chocolate in the microwave for another 2 minutes and
stir again.
5)
**NEVER ADD COLD OR COOL LIQUIDS TO THE FOUNTAIN, IT WILL STOP THE
FLOW**
6)
The chocolate needs to be completely melted and of thin consistency to
allow proper flow. (Add more oil if necessary, use a large spoon to test the
consistency examining how the chocolate drips from the spoon)
7)
Once the chocolate is completely melted, turn the motor switch on the
Chocolate Fondue Fountain to the ON position, so the motor and heater are
running at the same time.
8)
CREATING THE FONDUE FOUNTAIN EFFECT: