background image

-14-

-15-

This Multi-Cooker allows you to delay the start of your 

cooking so that cooking finishes when you need it.

Note: The DELAY TIMER function is not available on 

the BROWN/SAUTÉ, KEEP WARM, BOIL, SIMMER, or 

YOGURT settings. 

Note: Do not use the DELAY TIMER function when the 

recipe has perishable ingredients such as meat, fish, eggs, or 

dairy, as these may spoil.

1.   Adjust the Multi-Cooker settings using the instructions 

on pages 17-33.

2.   After setting the cooking time, press the DELAY TIMER 

button. The DELAY TIMER and START/STOP buttons 

will flash, and “0:30” will flash on the Display Screen,  to 

indicate the Multi-Cooker is being programmed on the 

delay setting.

3.   Press  the  and - buttons until you reach the number 

of hours and minutes you want the cooking process 

to be delayed (i.e., set the amount of time you wish to 

delay the cooking cycle). The maximum delay is 4 hours 

(4:00).

4.     Press  START/STOP button to begin the delay feature. 

The timer and DELAY TIMER button will stop flashing, 

while the START/STOP button will continue flashing. 

This will indicate that the Multi-Cooker has been set 

on the DELAY TIMER setting. The Display Screen will 

countdown the delay time until 0:00 is reached. When 

0:00 is reached, the DELAY TIMER light will turn off 

and the START/STOP light will stop flashing to show 

that time delay has finished. The word “HEAt” will 

appear on the display screen until the Multi-Cooker is 

fully pressurized. When the selected pressure has been 

HOW TO USE THE TIME DELAY

HOW TO USE THE TIME DELAY (CONT.)

reached, the timer will start counting down. 

Example:

It’s 4pm and you want to have a soup cooked and ready in 2 

hours’ time for dinner at 6pm. You want to set the machine 

now so you are free to do other things.

The pre-set function (if unchanged) will cook for 30 minutes 

at HIGH pressure. Time to gain pressure varies according to 

humidity and water temperature, but let’s assume it takes 15 

minutes to gain pressure. Therefore total time is 45 minutes. 

To have the soup ready by 6pm, you will need to delay 

the start of your cooking by approximately 1 hour and 15 

minutes.

1. Press SOUP/STEW

2.  The Display Screen will flash “0:30”

3.  Press the DELAY TIMER button and set for “1:15”

4. Press START/STOP

Содержание SCCPPC400-V1

























Отзывы: