E9
CRL Patch Fitting Hydraulic Door Hinge
Installation and adjustment instructions
22.5
45
22.5
60
156
TECHNICAL SPECIFICATIONS
Place the base plate and mark the location of the hole
shown in figure
Turn the plate in order to drill the hole using a
Ø10mm bit to a 40mm depth
Insert the wall anchors and tighten all the screws so as
to block the plate
Insert the wall anchors and tighten all the screws
without blocking the plate
Aline the plate and drill using a Ø 8mm bit to
a 40mm depth
Make a hole using a Ø 25mm corer at a depth of 25mm
Insert the hinge
BASE PLATE
For standard applications place the plate to the
wall (1)
1000 mm
Max
100 kg
- 15°C
+40°C
0°÷80°
8 mm
÷
13,52 mm
Drill using a Ø 8mm bit to a 40mm depth
Then drill the hole using Ø 10mm bit on 40mm depth.
For more information Freephone UK and Ireland on 00 800 0421 6144 | Fax free on 00 800 0262 3299
