1
C
2
Strike Pin flush to bottom
tube in unlocked position.
Bottom Mounting
Post Screw
Thumb
Turn
Unlocked
C
3
Secure Thumb Turn to Transmission
Cover with Screws and Set Screw.
Turn Handle over and center Internal Housing
over cutout in tube. With Internal Housing and
Thumb Turn in unlocked position align with Gear.
2
1
1
A
1
B
Transmission
Cover
Bottom Mounting
Post Screw
NOTE: Hold gear from bottom so it doesn’t fall.
Remove Bottom Mounting Post Screw to slide
Transmission Cover onto tube and then reinstall.
1
C
Replace Bottom
Mounting
Post Screw
Hold in position and test mechanism.
NOTE: If it doesn’t turn easily, go back to previous steps and adjust.
3
A
3
Turn Thumb Turn up to locked position.
Ensure Strike Pin is extended past
bottom tube.
B
3
Turn Thumb Turn down again
to unlocked position.
2
Align
ThumbTurn
with slot in Gear.
Gear
CRL LOCKING LADDER PULL ASSEMBLY
ALUMINUM
8
crlaurence.com | usalum.com
ASSEMBLE INTERNAL HANDLE (CONTINUED)
Install Thumb Turn