background image

ICE LADDER

Instructions

Updated 8-25-14

P.O. Box 2142

McHenry, IL 60051

815-861-2625

Email:

 [email protected]

Website:

 www.iceladder.com

SPECIFICATIONS

Work Mode:

 

Ladder Height - 8’

Transport Mode:

 

Height - 35”

 

Length - 50“

 

Width - 18”

 

Weight - 65 lbs.

Ice/Pier Thickness:

 

1” to 22”

Material:

 

304 Stainless Steel

Manufactured by:

Made in the

U.S.A.

Summary of Contents for ICE LADDER

Page 1: ...IL 60051 815 861 2625 Email chris iceladder com Website www iceladder com SPECIFICATIONS Work Mode Ladder Height 8 Transport Mode Height 35 Length 50 Width 18 Weight 65 lbs Ice Pier Thickness 1 to 22 Material 304 Stainless Steel Manufactured by Made in the U S A ...

Page 2: ...t surface 5 Locate ladder tensioning knobs 6 Loosen ladder tensioning knobs and set aside 7 Remove ladder from circle 8 Loosen upper circle grip lever 9 Rotate upper circle grip and set to pier or ice mode 10 Align pins with holes and lock lever 11 Loosen handle 12 Slide upper arm down to hand grip 13 Re tighten handle 14 Attach to ice or pier 15 Keep lower locking lever facing towards inside of c...

Page 3: ...y and stability insert ice screws in the ice screw holes 26 For ease of raising and lowering ladder insert a utility rope through back hole and tie to front hole 27 Run rope through upper grip loop and anchor away from for entry point 28 Leave enough slack to allow for lowering and raising of ladder 29 Enter and exit water as needed Use rope to assist in raising and lowering lower ladder section 1...

Page 4: ... after each use with tap water and dry Lubricate all pins hinges and handles with a silicone based lubricant Periodically check locking levers and tighten nuts to keep grip plates tight Hinge Pinch hazard Rung covers Coarse grit can scratch bare skin Ice Teeth Sharp points can cut skin Serial Number Location Ladder Serial Number Location Circle Handle Pull out and rotate to re index Storage Mode M...

Reviews: