CRL 64” BELT SANDER
MODEL BM64B FOR 102 x 1625mm SANDING BELTS
crlaurence.com
●
Toll Free (800) 421-6144
●
Fax (800) 262-3299
CALL TOLL FREE ANYWHERE IN THE U.S. AND CANADA
●
ALL PRODUCTS F.O.B. NEAREST WAREHOUSE
12
7.0 TROUBLESHOOTING
7.1 Troubleshooting Chart
1.Won't Start With Switch On
Power Failure
a. Check voltage at plug-in source.
b. Check voltage to switch on machine*
c.
Check
voltage
at
motor*
d.
Check
starting
capacitor
on
motor*
* You may want to have an electrician perform these checks
2.Water Does Not Flow
Water Restriction
a. Ensure water reservoir is full.
b. Ensure manual water valve is open.
c.
Remove
and
clean
spray
tube.
3. Belt Does Not Track
Out of Adjustment
a. Adjust according to operating instruction manual.
P.5 sec 2.1
.
b. Ensure manual water valve is open.
c.
Remove
and
clean
spray
tube.
4. Vibration or Noise
Bad Bearing
a. Check by feeling top pulley shafts for vibration from bearing
problems. Replace Top Pulley Assembly.
P.7 sec 4.5
b. Feel motor while running with and without belt and/or pulley.
If vibrating, replace motor per operating instructions.
TROUBLE
PROBLEM CAUSE
REMEDY
