![background image](http://html1.mh-extra.com/html/crl/2300rp/2300rp_operating-instructions-manual_2686785011.webp)
crlaurence.com • Toll Free (800) 421-6144 • Fax (800) 262-3299
CRL Glass Machinery • (866) 583-1377 • Fax (866) 584-9722 Int. Phone: (773) 242-2871
CALL TOLL FREE ANYWHERE IN THE U.S. AND CANADA • ALL PRODUCTS F.O.B. NEAREST WAREHOUSE
CRL/SOMACA BELT SANDER
MODELS 2300RP, 2300, AU2300
a nd
AU23
Page 11
ACCESSORIES FOR CRL/SOMACA 2300rp BELT SANDER
CRL Universal “One-Man” Movable
Glass Table
• Makes it Possible for One Person to
Sand Large Pieces of Glass
• Fits Any Make Upright Belt Sander
(Table Shown in Front of 2300rp Sander)
One person can sand large pieces of glass without having
to support the weight of the glass by using this CRL Universal
“One-Man” Movable Glass Table. It rolls on a support rail in
front of the sander, so the operator controls the amount of
pressure the glass applies against the belt. The table top is
carpeted, and has four pop-up ball casters, allowing easy glass
rotation. All sides can then be sanded without having to lift the
glass. The legs are adjustable to allow use with any upright belt
sander. Table Guide Rail is 156" (3.96 m) long; Table Top is 36"
x 60" (914 x 1524 mm). Minimum order is one each.
CAT. NO. 3LTRT
Legs Adjust to Fit Any Belt Machine
CRL Belt Guard Safety Shields for the 2300rp Upright Belt
Sanders protect your face and eyes from flying debris, giving you
an added degree of safety. The 2200SS is standard equipment on
early 2200rp Sanders up to Serial Number 67982. It can also be
retro-fitted on older 2200rp Sanders. The 3300SS is standard on
the 2200RP and 2300RP machines starting with Serial Number
67983. This is a safety attachment no shop should be without.
Minimum order is one each.
CAT. NO. 2200SS Fits 2200rp Machines up to serial no. 67982
CAT. NO. 3300SS Fits 2200 and 2300rp Machines starting with serial
no. 67983
CRL Belt Guard Safety Shields
CAT. NO. 2200SS
CAT. NO. 3300SS
CRL Platens
CAT. NO. FP2002
CAT. NO. 3MP2002
CAT. NO. BP2001
CAT. NO. PA100
CRL Platens below can only be used on the
2300
machine.The
PA100 adapter
must be fitted.
These accessories DO NOT
fit the 2300RP, which has a Roller Platten attached.
The BP2001 Bar Platen will produce a slightly rounded edge. The
FP2002 Flat Platen will work best when flat edges are desired. The 3MP2200 3M Platen provides a hard metal plate with a soft
rubber pad behind it for working both types of edges. The 330010, Roller Platen (page 9) can be used on the
2300
by using the
PA100 below. Minimum order is one each.