Crivit REK 230 E3, Инструкция по эксплуатации и правила безопасности

Страница: 13 / 94

Crivit REK 230 E3
English - 11
Take the connecting cable with cigarette lighter socket connection [1] out of the cable box [4].
Unwind the connecting cable fully. Now plug the cigarette lighter socket connection [1] into a
suitable cigarette lighter socket in your vehicle. The cool box is now switched on and will begin
chilling. To switch off the cool box, remove the cigarette lighter socket connection [1] from the
cigarette lighter socket in your vehicle.
The temperature control switch [6] on the front of the cool box does not function in 12 V
mode.
As cigarette lighter sockets in some vehicles still provide power when the ignition is switched
off, the cigarette lighter socket connection [1] should always be removed from the cigarette
lighter socket when leaving your vehicle. Otherwise this could significantly drain your vehicle’s
battery and therefore prevent the engine from starting up again.
To prevent items in the cool box from freezing, do not use the cool box in 12 V mode below
an ambient temperature of 18°C.
7.3.2. 230 V mode
Take the connecting cable with plug [3] out of the cable box [4]. Unwind the connecting cable
fully. Insert the plug [3] into a power socket, which is always easily accessible. Turn the temperature
control switch [6] on the front of the cool box clockwise to switch on the cool box. Now set the
temperature control switch [6] to the required cooling output. Turn the temperature control switch
[6] clockwise to increase the cooling output or anti-clockwise to reduce it.
To switch off the cool box, turn the temperature control switch [6] anti-clockwise to the “OFF”
position until it snaps into place.
Set the temperature control switch [6] to the 'ECO' position. The cool box is now in energy-
saving mode. The energy consumption level in this mode corresponds with energy class A+++.
7.4. Energy-saving tips
Do not place the cool box in direct sunlight.
Only use pre-chilled food and drinks.
Do not open the cool box for any longer than necessary and close the lid [2] properly.
Make sure that enough air can circulate between the goods being chilled. The cool box
features two indentations [8], which can accommodate two upright 2 L bottles (H 420 mm),
for example. The cool box can also hold a maximum of 36 upright 0.33 L drinks cans (W 67
mm x H 115 mm).