Crivit REK 230 E3, Инструкция по эксплуатации и правила безопасности

Страница: 12 / 94

Crivit REK 230 E3
10 - English
5. Copyright
All contents of these instructions are subject to copyright law, and are provided to the user solely as
a source of information. Any form of copying or reproduction of data and information without the
express written permission of the author is prohibited. This also concerns commercial use of the
content and data. The text and illustrations correspond to the technical standards at the time of
printing. Subject to alterations.
6. Before initial use
Unpack the cool box.
Check the cool box for signs of damage. If the cool box is damaged, it must not be put into
operation.
7. Initial use
For hygiene reasons, we recommend cleaning the cool box before using it for the first time. Refer to
the chapter section “8.3. Cleaning” for this.
The cool box is not suitable for continuous use! The maximum operating time is six days.
Switch off the cool box for at least two hours when it reaches the maximum operating time.
The two indentations [8] inside the lid provide space for two large flasks with a height of 420
mm.
7.1. Filling the cool box
Open the lid [2]. Place the food and drinks to be chilled inside the cool box. It is best to use pre-
chilled food and drinks for this. Close the lid [2] after filling.
7.2. Carrying the cool box
You can carry the cool box using the handle [5].
7.3. Switching the cool box on and off
7.3.1. 12 V mode
WARNING! You must ensure that your vehicle has a 12 V
in-car electrical system. The cool box must not be put into
operation with a 24 V in-car electrical system.